Concrete Detailing - Tekla User Assistance

Description

Only anchor rods are created. No holes are created.

Cut-out in the concrete beam.

Anchor rods are created. No holes are created.

Concrete console (111): Socket tab

Use the Socket tab to define whether socket anchors are created, how they are connected and the dimensions and position of the socket anchors in

Concrete console (111).

If you create the sockets on the Socket tab, the anchor rods on the Anchor tab are automatically considered as sockets.

Create socket

Option

Connect socket to prim by

Connection rod-connector

Type of reinforcing bars

Leg rotation

Connecting profile

Rod

Partname component

Description

Select whether sockets are created and which parts are included.

Select how the sockets are connected to the main part.

Select the connection method between the rod and the connecting profile.

Select the rod type.

Select the direction of the sockets.

You can enter an angle in the box on the right.

Properties for the connecting profile and the rod.

If you want to use a custom part to create the socket, select the Custom

part option in the Create socket list.

Then browse for the component, and use the list of options to position the custom part.

Concrete Detailing 71 Beam and column connections