Concrete Detailing - Tekla User Assistance

Ledge mesh

This tab allows you to define ledge mesh reinforcement in the member.

• Select the mesh size.

• Select the mesh grade.

• Specify the mesh right side cover, “C1”.

• Specify the mesh left side cover, “C2”.

• Specify the mesh bottom cover, “C3”.

• Specify the mesh top cover, “C4”.

• Specify the left end distance to first wire, “d1”.

• Specify the right end distance to first wire, “d2”.

Mesh extends the full length of the spandrel, less the “d1” and “d2” end dimensions.

Automated Reinforcement Layout 667 Ledge spandrel (55)