Concrete Detailing - Tekla User Assistance

Use for

Situation

Embeds

Description

Selection order

1. Select a concrete part.

2. Pick one point on the part face where you want to insert the embed.

The detail is created automatically when you pick the point.

See also

Embed (1008): Picture tab (page 580)

Embed (1008): Top part tab (page 582)

Embed (1008): Bottom part tab (page 583)

Embed (1008): Parts tab (page 583)

Embed (1008): Placement tab (page 584)

Embed (1008): Reinforcing bar tab (page 586)

Embed (1008): Advanced tab (page 586)

Embed (1008): Bolts (page 587)

Embed (1008): Picture tab

Use the Picture tab to control the embed dimensions, connection method and rotation in Embed (1008).

Embed dimensions

Define if the embed needs to be recessed. You can define the dimensions of the recess, distance from the recess plane to the top of the embed, select the shape of the cutout and whether the cutouts are handled as empty cutouts or cutouts with a formwork part.

Reinforcement 580 Beam, column, and slab reinforcement

Circle

Option Example

Half moon X

Square

Reinforcement 581 Beam, column, and slab reinforcement