Concrete Detailing - Tekla User Assistance

Option Description surface of the toppings. Use this option to place a topping over any sloped surface.

Elevation value Enter an appropriate value based on the choice picked in the list box above. This input box is grayed out if you have selected the Use

control points option.

Topping configuration Specify whether the topping is integral with the underlying precast unit (monolithic) or poured on site.

Concrete material Specify the concrete strength for the topping, from the material catalog.

Reinforcing mesh Select the mesh reinforcement from the mesh catalog.

Advanced

Use the options on this tab to alter the elevation of any individual node:

• Control point indexes: you can specify one control point or multiple control point indexes simultaneously.

• Elevation: You can overwrite Elevation (thickness at individual control points.

Automated Reinforcement Layout 701 Wash (59)