Concrete Detailing - Tekla User Assistance

Situation Description

Double wall with opening and reinforcement around the opening.

Ring reinforcement goes around both shells.

All reinforcing bars that connect the shells (U-bars and stirrups) are attached to the shell that is selected at creation.

Ring, beam and column reinforcing bars are attached to the selected shell that has been the input.

Selection order

1. Select the concrete part to reinforce.

The reinforcement is created automatically.

Picture tab

Use the Picture tab to select how the corners of a wall panel are reinforced.

Option

Corner reinforcem ent

Description

Select how the corners are reinforced and the bar is offset on both sides of the corner.

Minimum breaking distance

Cuts smaller than this value are ignored and the reinforcing bars are not cut.

Reinforcement 528 Beam, column, and slab reinforcement