Important Safety Reminders. Hoover TFB2282

freemotion_bagged_main_MT_V2.qxp 11/06/2007 17:11 Page 4

HOOVER FREEMOTION USER GUIDE

Contents

Important Safety Reminders....................................................................................................................4

It is important that you do not..................................................................................................................4

Assembling Your Cleaner ........................................................................................................................4

Using your cleaner ..................................................................................................................................4

Cleaner Maintenance ..............................................................................................................................5

Accessories ............................................................................................................................................5

User Checklist..........................................................................................................................................5

Important Information ..............................................................................................................................6

Your guarantee ........................................................................................................................................6

IMPORTANT SAFETY REMINDERS:

This cleaner should only be used for domestic cleaning, as described in this User Guide. Please ensure that this guide is fully understood before operating the appliance.

WARNING: Electricity can be extremely dangerous. This appliance is double insulated, and must not be earthed. This plug is fitted with a 13 amp. fuse. (UK Only).

Important: The wires in the mains power lead are coloured in accordance with the following code:

Blue - Neutral Brown - Live

WARNING: After use, switch the cleaner off, and remove the plug from the electricity supply. Do not leave the appliance unattended whilst plugged into the electricity supply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance.

Safety with Children, Elderly or the Infirm: Do not let children play with the appliance or its controls.

Please supervise the use of the appliance by older children, the elderly or the infirm.

Static Electricity: Some carpets can cause a small build up of static electricity. Any static electricity discharge is not hazardous to health.

GB

IT IS IMPORTANT THAT YOU DO NOT:

• Position the cleaner above you when cleaning the stairs

• Use the cleaner out of doors, on wet surfaces, or for wet pickup

• Pick up matches, hot ash, cigarette ends, hard or sharp objects or anything that may damage the cleaner

• Spray with, or pick up flammable liquids, cleaning fluids, aerosols, or their vapours, as this may cause risk of fire/explosion

• Run over the supply cord whilst using the cleaner, or remove the plug by pulling on the cord

• Stand on, or wrap the power cord around arms or legs when using the cleaner

• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged, stop using the cleaner IMMEDIATELY: to avoid a safety hazard, an authorised Hoover Service engineer must replace the supply cord

ASSEMBLING YOUR CLEANER:

• Connect hose to cleaner main body, as shown in P1

• Connect tube upper end to handle, as shown on P2

• Connect floor nozzle to lower tube end, as shown in P3

USING YOUR CLEANER:

1. Power Supply - Extract cord fully and plug it into a power supply (P4).

2. Navigator System - For outstanding ease of use, grip the handle as shown (P5). Pull the

TeleZoom trigger to adjust the length of the metal tubes and find the most comfortable cleaning position (P5).

3. Front&Side Clean nozzle - Press the pedal on the nozzle (P6) to select the ideal cleaning mode for the floor type.

Hard Floor: The brushes are lowered to protect the floor

Carpet: With lifted brushes for the deepest clean

The Front and Side Clean nozzle rotates each way (P7) to reach into the narrowest spaces. Tip one end of the nozzle to bring it back to normal working position.

4. Turn the cleaner on - Depending on model this is achieved by:

•

•

•

Pressing the On/Off button on the Navigator System handle (P8)

Pushing the power control slider on the cleaner body (P9)

Pushing the On/Off button on the cleaner body (P10)

5. Adjust the power setting - Depending on model this is achieved by:

•

• Selecting the cleaning programme in the Navigator handle (P12)

Sliding the power control to suit the surface to be cleaned (P11)

6. Switch off at the end of use by reversing the action to switch on. Unplug then gently pull the power cord out of the cleaner (P4) and the cord will then begin to automatically retract back into the cleaner.

7. Parking and Storage - The tube can be parked for temporary storage while in use (P13), or in the storage position when not in use (P14).

Please Read Carefully Before Use

4