Software User’s Agreement. T&D RTR-500DC

Software User’s Agreement

Disclaimers

- Although T&D Corporation has made operational tests on our software

"RTR-500DC for Windows", we cannot guarantee that all operations will work properly under all conditions.

- T&D Corporation shall not accept any responsibility for any damage whether direct or indirect that results from the usage of "RTR-500DC for Windows".

Specifications of "RTR-500DC for Windows" may be subject to change and service may be terminated without advance notice to the user. In such a case T&D

Corporation shall not be responsible for any damages whether direct or indirect from the inability to use "RTR-500DC for Windows".

- T&D Corporation has no obligation to correct any defects found in

"RTR-500DC for Windows".

Copyright

- The Copyright for RTR-500DC for Windows, including the program and relevant documents, belongs solely to T&D Corporation.

- The reprinting or redistribution for commercial purposes whether in part or in whole, in magazines or as a part of any product is strictly forbidden without the expressed consent of T&D Corporation. Any inquires concerning commercial redistribution should be directed to the Sales Department of T&D Corporation.

Please do not attempt to make any changes or modifications to

RTR-500DC for Windows.

Introduction 3

Table of Contents

Introduction

Introductory Manual -----------------------------------------1

Important Notices and Disclaimers ------------------------2

Software User’s Agreement --------------------------------3

Table of Contents ---------------------------------- 5

Table of Contents ---------------------------------- 5

Safety Precautions and Instructions ------------- 6

Explanation of Symbols ------------------------------------6

What is "RTR-500DC"? --------------------------12

Outline ------------------------------------------------------ 12

Features of Wireless Communication Function -------- 12

Features of the RTR-500DC ------------------------------ 13

Before Using this Product ------------------------14

What are "Base Units", "Remote Units" and

"Repeaters"? ---------------------------------------------- 14

Basic Procedures ---------------------------------16

Getting Ready

Package Contents --------------------------------18

Connect the Antenna ------------------------------------- 18

Appearance Diagram and Part Names ---------19

Install the Battery ---------------------------------20

Other Power Sources Available for Use ----------------- 20

Battery Replacement ------------------------------------- 20

Sleep Mode ------------------------------------------------ 20

Power and Auto Power Off Function ------------21

Turning ON the Power ------------------------------------ 21

Turning OFF the Power ----------------------------------- 21

Auto Power Off Function --------------------------------- 21

Operations via Buttons and Operation Dial-----22

Using the Operation Dial ---------------------------------- 22

Button Functions ------------------------------------------ 22

About the Icons and Abbreviations -------------23

Installing the Software ----------------------------24

Before Installing the Software: --------------------------- 24

Installing the USB Device Driver -----------------27

Carrying out Registration, Settings, and Operation

Process of Making Registrations and Settings -30

1. Make Settings for Base Units ------------------------- 30

2. Register Data Loggers as Remote Units ------------- 30

3. Register Repeaters (when necessary) ---------------- 30

4. Check Wireless Signal Strength and Make Wireless

Route Settings --------------------------------------------- 31

Launcher Window and Applications ------------32

How to Open ---------------------------------------------- 32

Communication between RTR-500DC and PC -33

Operations which require RTR-500DC PC

Communication ------------------------------------------- 33

Communication between Remote Unit / Repeater and PC ---------------------------------------------34

Operations which require Remote Unit / Repeater PC

Communication ------------------------------------------- 34

Wireless Communication between RTR-500DC and Remote Unit ----------------------------------35

Operations which require RTR-500DC Remote Unit

Wireless Communication --------------------------------- 35

Operating Remote Units via Multiple RTR-500DC Units - 35

How to Register the Same Remote Unit to Multiple

RTR-500DC Units ----------------------------------------- 35

Optical and Cable Communication between RTR-

500DC and Remote Units ------------------------36

Operations which require RTR-500DC Remote Unit

Optical and Cable Communication ---------------------- 36

Optical Communication: RTR-501/502/503/505/507S - 36

Cable Communication: RTR-574 / 576 ----------------- 36

Communication Functions

Downloading Data by Group --------------------38

Wireless Communication:[ Gather Data] ------- 38

Reading Judgement Results in the “Gathering Result”

Window ---------------------------------------------------- 40

Downloading Data from a selected Remote Unit -41

Wireless Communication:[

Optical / Cable Communication: [

Gather Data] ------- 41

Gather Data] - 42

Monitoring -----------------------------------------43

Gather Current Readings and Current Status of Remote

Unit : [ Monitor Mode] ---------------------------- 43

Communication Conditions for Monitoring ------------- 44

Viewing a Monitoring Window -------------------45