Starting / Stopping Remote Unit Recording. T&D RTR-500DC

Starting / Stopping Remote Unit Recording

Upon the start of recording, all recorded data stored in the Remote

Unit will be deleted.

Wireless Communication: [ Record Settings]

Follow the directions below to make settings to Start / Stop Recording for one specified Remote Unit.

1. In the Main Menu, open [WL Record Settings].

2. Select [Start Recording] or [Stop Recording] Remote Unit Recording.

3. Select the Group and Remote Unit.

4. When you wish to start recording, make settings for the recording start mode and select [Execute] to search for the Remote Units which are available for communication.

- Pressing the Operation Dial during transmission will cancel the operation.

Record Settings window for starting recording

[Start]

[Programmed]: Recording will begin on the set date and time.

[Immediate]: Recording will begin immediately.

[Interval] and Recording Mode

The current Recording Interval and the icon for the Recording Mode Settings in the

Remote Unit will appear here.

Programmed Recording Start Time

If you have selected [Programmed], make settings for the recording start time.

Current Time

If you wish to start recording in multiple Remote Units at the same time, make settings from the [Remote Unit Settings] Menu in the

RTR-500DC Settings Utility. For details, see the Help Menu in the

Application.

Communication Functions 49