Monitoring. T&D RTR-500DC

Monitoring

Gather Current Readings and Current Status of Remote

Unit : [ Monitor Mode]

The RTR-500DC Base Unit can be set up to communicate with the registered Remote Units, via wireless communication at the set interval, to gather current readings and current status of Remote Units.

- While using the Monitoring Function, the Auto Power Off Function will be disabled.

1. In the Main Menu, select [WL Monitor Mode].

2. In the [Target] window, select and set the monitoring range and interval.

[All Groups]

Remote Units in all groups registered to the RTR-500DC will be monitored, and current readings and current status for those units will be displayed consecutively every 2 seconds. Pressing the dial will start the communication (search).

[Specify Group]

All Remote Units in the selected groups will be monitored, and current readings and current status for those units will be displayed consecutively every 2 seconds.

Pressing the dial will display the [Choose a Group] window. Select and set the group to start the communication (search).

[Specify Remote Unit]

The selected Remote Units will be monitored. Pressing the dial will display in the following order: [Choose a Group] - [Choose a RU]. Select and set the Remote Unit to start the communication (search).

[Interval] (Monitoring Interval)

[10S] to [59 S]: in units of 1 second

[1M] to [60 M]: in units of 1 minute

Pressing the Operation Dial during a monitoring session or while searching for a

Remote Unit will cancel the operation.

Communication Functions 43