Viewing Data Stored in RTR-500DC. T&D RTR-500DC

Viewing Data Stored in RTR-500DC

Here you can view and check data stored in the RTR-500DC Unit.

Viewing a Data List: <List> button / [Data List]

1. Press the <List> button on the RTR-500DC or open [Data List] in the Main Menu to view the Data List.

List No.

This shows the number assigned automatically in the order the data was downloaded.

Device Type (Remote Unit)

Remote Unit Name

This shows the Remote Unit Name entered when Remote Unit Registration was carried out.

Data Lists for RTR-574 / 57

The data list display for the RTR-574 and RTR-576 changes depending on the communication method used for the download: Wireless

Communication or Cable Communication.

Example of RTR-574 data lists

Data Downloaded via Wireless

Communication

Data Downloaded via Cable

Communication

Data Downloaded via Wireless Communication

For the RTR-574, the downloaded data is stored as two sets of data: "Illuminance and UV Intensity" [No.8] and "Temperature and Humidity" [No.9]. (Data

List [No.8] and [No.9]) For the RTR-576, the downloaded data is stored as two sets of data: "CO2 Concentration" and "Temperature and Humidity".

Data Downloaded via Cable Communication

When the data is downloaded via a communication cable, the data is stored as one set of data for all four channels (RTR-574) or all three channels (RTR-576).

(Data List [No.6])

56 Viewing Functions

Detailed Information of Data: <List> button / [Data List]

1.

Press the <List> button on the RTR-500DC or open [Data List] in the Main Menu to view the Data List.

2. Select data from the list and press the <List> button to open the detailed info window.

3. By moving the Operation Dial up and down and selecting different data, it is possible to view the detailed info of all data in numerical order in the list.

For RTR-501 / 502 / 503 / 505 / 507S / 576

Example of RTR-503 data details Example of RTR-505-Pt data details

For RTR-574

Example of Data including Illuminance and UV Intensity

Device Type (Remote Unit)

Recording Interval and Mode

This shows the Recording Interval and Mode set in the Remote Unit.

Example: = 2-second interval, One Time Mode

= 30-minute interval, Endless Mode

Number of Recorded Data

[Collect]: Data Collection Date / Time

This shows the date and time when data was downloaded into RTR-500DC.

[Start]: Recording Start Date / Time

This shows the date and time when recording was started in the Remote Unit.

VIewing Functions 57

[Latest]: Date / Time of Latest Data

This shows the date and time that of the last recording.

Cumulative Values

For Illuminance and UV Intensity data from RTR-574, cumulative measurements can also be viewed.

[NAME]: Remote Unit Name

This shows the Remote Unit Name entered when Remote Unit Registration was carried out.

[GROUP]: Group Name

When downloading data from the Remote Unit which has not been registered in the

RTR-500DC, the group name will appear as " ".

[Sensor]: Type of Connected Sensor

When using an RTR-505-TC (Thermocouple) or an RTR-505-Pt (Pt100, Pt1000), this shows the sensor type being connected to the Remote Unit.

58 Viewing Functions