Operational Settings for RTR-500DC. T&D RTR-500DC

Operational Settings for RTR-500DC

Operational settings can be made from [Set Functions] in the Main

Menu.

Changing Unit of Temperature

1. In the Main Menu, open [Set Functions] - [Set Temp Unit].

2.

Select the desired unit of temperature (°C or °F).

Current Setting

Adjusting the Backlight

1. In the Main Menu, open [Set Functions] - [Set Backlight].

2. Change the value by moving the dial up and down.

Setting Values: 1 to 100, [OFF] (Factory Default Setting: 80)

If the Unit is not used for more than five seconds, the LCD Backlight will automatically turn off to save battery power.

Once operation is re-started, it will automatically turn back ON.

When the Unit is connected to an AC adaptor, the Backlight remains

ON.

66 Making the RTR-500DC Unit Settings / Other Functions