Installing the USB Device Driver

Have you already installed the supplied software?

Before connecting a Unit to a PC with a USB cable make sure to install the supplied software first.

If the Base Unit is not an RTR-500DC, please follow directions for installing the USB Device Drivers found in the Introductory Manual that came with the

Base Unit you are using.

1.

Open the “RTR-500DC for Windows” from the

Start Screen or Start

Menu.

Launcher Window

2.

Open the RTR-500DC

Settings Utility.

3. Connect the Unit with the supplied USB cable to your computer.

The USB driver installation will start automatically.

- Do not connect a Unit to your computer until the software has been installed.

4. After the USB driver installation is completed, the factory default settings will be displayed automatically in the settings window.

Getting Ready 27

Carrying out Registration, Settings, and

Operation

This section explains a few items that need to be checked before carrying out registration and settings for the Base Units, Remote Units, and Repeaters via the software, and before starting operation.