Figure 14 Print Menu. Electronics Diversified BIJOU 2.11, BIJOU Ver. 2.11
Add to My manuals51 Pages
advertisement
Figure 14 Print Menu
Figure 15 MISC Menu
18
The Print Functions menu allows access to all print features. Item:
1. Allows you to print only the channel output levels for each cue.
2. Print extra line. Some printers require this command to advance the paper at the end of each line of print.
Use YES command if your printer is over printing and not advancing.
3 - 7. Prints all information for; cues, subs, effects, macros and patch.
NOTE: For compatible printers and printer set up go to the
ACCESSORY section at the end of this manual.
The Miscellaneous Functions menu allows you to activate or deactivate optional accessories and to reset the console clock (it is easier then on your VCR) functions.
1. HHR
Hand Held Remote. If you purchased a system with the optional Hand Held Remote then this position should be toggled [F2] to show YES. If your system does not have this option toggle [F3] to NO.
2. Time Hour
Allows you to set the hour on the system clock (upper right hand corner of all screens). To set the time hit [2]
Time Hour [_#_] the hour of the day [Enter]. For 9 o’clock the entry would be [2] [9] [Enter] for 11 o’clock the entry would be [2] [1] [1] [Enter].
3. Time Minute
Allows you to set the minute on the system clock. To set the minutes hit [3] Time Minutes [_#_] the minutes, then enter.
4. 24 Time Display
Allows the clock to display time in “Military/International” time. If you use this selection 5:30 PM will be displayed as 17:30:00 instead of 5:30:00. This needs to be selected if using SMPTE or MIDI Show Control
Functions that are AM and PM dependent. Select 24 hour display before setting hour in 2 above.
5. SMPTE
This function is an option that may not have been purchased with your console. SMPTE stands for the
Society Of Motion Picture & Television Engineers time code system. A YES in this item activates input/output port and screen for programming SMPTE timed events.
6. MIDI
This function is an option that may not have been purchased with your console. A YES in this column
advertisement
Related manuals
advertisement
Table of contents
- 5 Figure 1 Bijou
- 7 figure 2 Bijou Rear Panel
- 9 Figure 3 Front Panel
- 10 Figure 4 Screen Keys
- 11 Figure 5 Action Keys
- 13 Figure 6 Number Keys
- 13 Figure 7 XY & AB Fader Control Keys
- 14 Figure 8 Default Setting 1 Screen
- 15 Figure 9 Default Menu
- 15 Figure 10 Default Setting 2 Screen
- 16 Figure 11 Default Setting 2 menu
- 16 Figure 12 Clear Menu
- 17 Figure 13 Save Menu
- 17 Figure 14 Load Menu
- 18 Figure 14 Print Menu
- 18 Figure 15 MISC Menu
- 19 Figure 16 Bijou disk drive
- 20 Figure 17 Patch Screen
- 21 Figure 18 Patch at level, profile, ND, and park
- 23 Figure 19 Profile Screen
- 24 Figure 20 Stage Screen
- 25 Figure 21 Help Window
- 25 Figure 22 Cross Fader, Submaster Output Display
- 25 Figure 23 XY Cross-Fader in Manual Mode
- 26 Figure 24 Channels/faders
- 31 Figure 25 Cue List Screen
- 34 Figure 26 Stage Screen (Rem Dim)
- 34 Figure 27 Cue List with different Cue types
- 35 Figure 28 Stage Screen with Multi-Part Cue loaded
- 38 Figure 29 Cue Preview Screen
- 39 Figure 30 Cue List Screen
- 40 Figure 31 Track Screen
- 40 Figure 32 Bijou Submasters
- 41 Figure 33 Sub Preview Screen
- 44 Figure 34 Timed NORM Sub W/Hold
- 46 Figure 35 Effect Screen
- 48 Figure 36 Macro Screen
- 49 Figure 37 Recording MACRO in Stage Screen