Revision history. Infineon CY8C4045LQI-S412, CY8C4045LQI-S413, CY8C4025AZI-S413T, CY8C4024LQI-S412, CY8C4025AZQ-S403, CY8C4024LQI-S403T, CY8C4025LQI-S412, CY8C4025LQI-S402T, CY8C4045LQI-S411, CY8C4024AXI-S412

PSoC™ 4 MCU: PSoC™ 4000S

Based on Arm® Cortex®-M0+ CPU

Revision history

Revision history

Document version

**

*A

*B

*C

*D

*E

Date of release Description of changes

2015-08-28 New datasheet.

2015-10-30

Removed 20-ball WLCSP package related information in all instances across the document.

Added 25-ball WLCSP package related information in all instances across the document.

Updated

Pinouts :

Updated

Table 1

.

Updated

Electrical specifications :

Updated

Analog peripherals :

Updated

Comparator

:

Updated

Table 10

(Updated details in “Details/Conditions” column corresponding to V

ICM3

, I

CMP3

parameters (Added V

DDD

≥ 2.2V at –40 °C)).

Updated

Table 11

(Updated details in “Details/Conditions” column corresponding to TRESP3 parameter (Added V

DDD

Updated

CSD and IDAC

:

Updated

Table 13

.

Updated

Ordering information

:

Updated part numbers.

≥ 2.2V at –40 °C)).

2015-12-08 Changed status from Advance to Preliminary.

2016-01-27

Updated

Packaging :

Updated

Table 38

(Replaced TBD with values for Theta J

A

and Theta J

C parameters).

Updated

Package diagrams

:

Replaced TBD with spec 002-09957 **.

Added Errata.

2016-02-16 Updated to new template.

2016-03-15

Updated

Pinouts :

Updated

Table 1

.

Updated

Electrical specifications :

Updated

Device level specifications :

Updated

XRES :

Updated

Table 8

(Updated all values corresponding to R

PULLUP

parameter).

RESETWAKE

Updated

Table 9

(Updated all values corresponding to T parameter).

Updated

Analog peripherals :

Updated

CSD and IDAC

:

Updated

Table 12

.

Updated

10-bit CAPSENSE™ ADC :

Updated

Table 13

.

Updated

Memory :

Updated

Flash :

Updated

Table 24 (Updated all values corresponding to T

T

ROWPROGRAM

parameters).

ROWERASE

,

Datasheet 54 002-00123 Rev. *O

2022-07-28

PSoC™ 4 MCU: PSoC™ 4000S

Based on Arm® Cortex®-M0+ CPU

Revision history

Document version

*F

*G

*H

*I

*J

Date of release Description of changes

2016-05-12

2016-07-27

2016-09-14

2017-01-09

Updated

Pinouts :

Updated

Alternate pin functions

:

Updated

Table 2

.

Updated

Electrical specifications :

Updated

Analog peripherals :

Updated

CSD and IDAC

:

Updated

Table 12

(Updated all values corresponding to IDAC1INL,

IDAC2INL, SNR, IDAC1CRT1, IDAC1CRT12, IDAC1CRT22, IDAC1CRT32,

IDAC2CRT1, IDAC2CRT12, IDAC2CRT22, IDAC2CRT32, IDACMISMATCH2,

IDACMISMATCH3 parameters).

Updated

10-bit CAPSENSE™ ADC :

Updated

Table 13 (Updated all values corresponding to A_SND parameter).

Removed Errata.

Updated to new template.

Changed status from Preliminary to Final.

Updated

Functional definition

:

Updated

Special function peripherals

:

Updated

LCD segment drive :

Updated description.

Updated

Electrical specifications :

Updated

Device level specifications :

Updated

Table 4

(Updated details corresponding to I

parameters).

, I

DD8

, I

DD11

, I

DD17

,

I

DD20

, I

Updated

, I

GPIO :

, I

DD26

, I

DD29

, I

DD32

, I

DD_XR

Updated

Table 6

(Updated details in “Details/Conditions” column corresponding to V

OH

parameter and spec ID SID60).

Updated

Packaging :

Updated

Table 37 (Updated details in “Description” column corresponding

to 25-Ball WLCSP package (Updated package dimensions)).

Updated

Table 40

(Added 25-ball WLCSP package and its corresponding details).

Completing Sunset Review.

Added 40-pin QFN package related information in all instances across the document.

Updated

Electrical specifications :

Updated

Device level specifications :

Updated

Table 4

(Updated details corresponding to I

DD5

I

DD20

, I

DD23

Updated

, I

DD23A

, I

Packaging :

, I

Updated

Package diagrams

:

Added spec 001-80659 *A.

DD29

, I

DD32

, I

DD_XR

parameters).

, I

DD8

, I

DD11

, I

DD17

,

Updated

Electrical specifications :

Replaced PRGIO with Smart I/O in all instances.

2017-04-26 Updated Cypress Logo and Copyright.

Datasheet 55 002-00123 Rev. *O

2022-07-28

PSoC™ 4 MCU: PSoC™ 4000S

Based on Arm® Cortex®-M0+ CPU

Revision history

Document version

*K

*L

Date of release

2017-11-17

2019-07-31

Description of changes

Updated Document Title to read as “PSoC® 4: PSoC 4000S Datasheet

Programmable System-on-Chip (PSoC®)”.

Added 32-pin TQFP Package related information in all instance across the document.

Updated

Ordering information

:

Updated part numbers.

Updated

Packaging :

Updated

Package diagrams

: spec 001-42168 – Changed revision from *E to *F.

Added spec 51-85088 *E.

Updated

Features :

Updated

32-bit MCU subsystem

:

Updated description.

Added

Development ecosystem

.

Added

PSoC™ Creator

.

Updated

Functional definition

:

Updated

System resources :

Updated

Power system

:

Updated description.

Updated

Watch crystal oscillator (WCO)

:

Updated description.

Updated

Fixed function digital :

Updated

Serial communication block (SCB) :

Updated description.

Updated

Special function peripherals

:

Updated

LCD segment drive :

Updated description.

Updated

Pinouts :

Added Note below

Table 1 .

Updated

Electrical specifications :

Updated

Analog peripherals :

Updated

CSD and IDAC :

Updated

Table 12

(Updated details in “Details/Conditions” column corresponding to V

REF

, V

REF_EXT

and V

COMPIDAC

parameters).

Updated

Digital peripherals

:

Updated

SPI :

Updated

Table 18

(Updated all values corresponding to TSSELSSCK parameter).

Updated

Ordering information

:

Updated part numbers.

Updated

Packaging :

Updated

Package diagrams

: spec 001-13937 – Changed revision from *F to *G.

Updated to new template.

Completing Sunset Review.

Datasheet 56 002-00123 Rev. *O

2022-07-28

PSoC™ 4 MCU: PSoC™ 4000S

Based on Arm® Cortex®-M0+ CPU

Revision history

Document version

*M

*N

*O

Date of release

2020-11-20

2020-12-23

2022-07-28

Description of changes

Updated

Features :

Added “Clock sources”.

Added “ModusToolbox™ software”.

Updated

Development ecosystem

:

Replaced “More Information” with “Development ecosystem” in heading.

Updated description.

Added

ModusToolbox™ software .

Updated

Electrical specifications :

Updated

Device level specifications :

Updated temperature range in description below heading.

Updated

System resources :

Updated

Power-on reset (POR) :

Updated

Table 25

.

Updated

Ordering information

:

Updated

Table 36

:

Added Q-temp MPNs for the 48-pin TQFP package.

Updated

Packaging :

Updated

Table 38

.

Updated to new template.

Updated

Ordering information

:

Updated Nomenclature:

Updated details under Temperature Range to show “Extended Industrial”.

Updated

Table 29

: Updated spec SID223 and SID223A. Added specs

SID223B through SID223D.

Migrated to Infineon template.

Datasheet 57 002-00123 Rev. *O

2022-07-28

Please read the Important Notice and Warnings at the end of this document

Trademarks

All referenced product or service names and trademarks are the property of their respective owners.

Edition 2022-07-28

Published by

Infineon Technologies AG

81726 Munich, Germany

© 2022 Infineon Technologies AG.

All Rights Reserved.

Do you have a question about this document?

Go to www.infineon.com/support

Document reference

002-00123 Rev. *O

IMPORTANT NOTICE

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”).

For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office

( www.infineon.com

).

With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon

Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.

WARNINGS

Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon

Technologies office.

In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications.

Except as otherwise explicitly approved by Infineon

Technologies in a written document signed by authorized representatives of Infineon

Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.

The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application.