Installation Manual

Twin Disc, Incorporated

Introduction

Safety

All people installing and operating this unit must employ safe operating practices. Twin Disc Incorporated is not responsible for any personal injury resulting from any unsafe and careless use of hand tools, power tools, lifting equipment, or from any unsafe practices during installation and operation.

Because of the possible danger to people or property from accidents that may result from the use of manufactured products, it is important that correct procedures be followed. Products must be used in accordance with the information specified.

Proper installation procedures must be used. Proper safety devices, such as guards, may be required as specified in applicable codes. Safety devices are not provided by Twin Disc Incorporated nor are they the responsibility of Twin

Disc Incorporated.

Source of Service Information

All information, illustrations and specifications in this manual are based on the latest information at the time of publication. The right is reserved to make changes at any time without notice.

Individual product service bulletins are issued to provide Twin Disc distributors with immediate notice of new service information. These service bulletins are distributed to all Twin Disc EC300 Control distributors throughout the United

States and many foreign countries.

For the latest service information on Twin Disc Incorporated products, contact any Twin Disc distributor or service dealer. For a complete list of Twin Disc

Distributors or Service Dealers, please see our Corporate website at http:// www.twindisc.com. For additional information you may contact Twin Disc

Incorporated Product Service by e-mail at [email protected] or phone at

(800) 558-3208 ext 2727.

EC300 Marine Control System Installation Manual #1024168

17