advertisement
Introduction
Twin Disc, Incorporated
Required Tools
18
Installation and Set-up may require the following tools:
Electric or pneumatic drill
Assorted drill bits
Center punch
#1 Phillips screwdriver
Screwdriver with a 1/8 in. blade
Wire terminal crimpers
Wire strippers
DC voltmeter or multimeter
Watch with a seconds hand
Tachometer, oscilloscope, or frequency counter for troubleshooting dual engine applications
3/32 in. hex key (Allen) wrench
1/8 in. hex key (Allen) wrench
Deutsch crimp tool (P/N HDT 48-00) for 12 to 24 AWG wire sizes
Torque wrench capable of measuring 4.52 Nm (40 lb-in.) for installing a speed sensor in the flywheel housing and for mounting components
File, rasp, or sandpaper to smooth cut surfaces
500 VDC Megohmmeter for testing power wiring as per ABS requirements.
Laptop with latest MFST software updates
EC300 Communication Kit (Twin Disc p/n 1021108)
EC300 Display Harness and Display (Twin Disc p/n 1018791)
EC300 Marine Control System Installation Manual #1024168
advertisement
Key Features
- Remote throttle control
- Transmission engagement control
- Engine Sync
- Trolling
- Shaft Brake
- Mechanical Actuator Output
- Transmission Oil Pressure and Oil Temperature Monitoring
- Helm Display
Related manuals
Frequently Answers and Questions
What types of vessels is the EC300 Marine Control System suitable for?
What types of engine/transmission combinations is the EC300 Marine Control System compatible with?
What are some of the special features of the EC300 Marine Control System?
advertisement