advertisement
Component Installation
Twin Disc, Incorporated
Push-Pull Cable Installation Guidelines
Correct push-pull cable installation will aid in trouble-free operation of the control system. Different installation kits are available. Where possible, quickdisconnect ball joints should be used to assist in push-pull cable adjustments.
Push-pull cable installation should meet the following guidelines:
Cables must be Morse 33 Series RED JAKET ® Supreme or equivalent.
A minimal number of bends should be used.
Bends should use the maximum possible radius where bends are required. Refer to cable manufacturer specifications.
Cables should not be routed near hot surfaces.
Cables should not be routed in service or access areas.
48 EC300 Marine Control System Installation Manual #1024168
advertisement
Key Features
- Remote throttle control
- Transmission engagement control
- Engine Sync
- Trolling
- Shaft Brake
- Mechanical Actuator Output
- Transmission Oil Pressure and Oil Temperature Monitoring
- Helm Display
Related manuals
Frequently Answers and Questions
What types of vessels is the EC300 Marine Control System suitable for?
What types of engine/transmission combinations is the EC300 Marine Control System compatible with?
What are some of the special features of the EC300 Marine Control System?
advertisement