How to read this manual. JVC KD-AR8500, KD-AR8500J, AR8500 - Radio / CD


Add to My manuals
177 Pages

advertisement

How to read this manual. JVC KD-AR8500, KD-AR8500J, AR8500 - Radio / CD | Manualzz

How to read this manual

The following methods are used to make the explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see pages

50 – 53).

• Button operations are mainly explained with the illustrations as follows:

How to forcibly eject a disc

If a disc cannot be recognized by the receiver or cannot be ejected, eject the disc as follows.

• If an SD card is inserted, eject the SD card first (see page 15).

1

Press briefly.

Press repeatedly.

2

Press either one.

4

Press and hold until your desired response begins.

Press A, then press

B.

Press and hold both buttons at the same time.

• If this does not work, reset your receiver.

• Be careful not to drop the disc when it ejects.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: SD card operations.

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

advertisement

Key Features

  • Plays CDs and SD cards
  • Built-in AM/FM tuner with 30 presets
  • 4-channel amplifier with 50 watts per channel
  • EQ settings for customizing the sound
  • Detachable front panel for security

Related manuals

Frequently Answers and Questions

How do I reset my JVC KD-AR8500?
To reset your unit, press and hold the reset button for at least 2 seconds.
How do I change the display pattern?
To change the display pattern, press the BAND button repeatedly until the desired pattern appears.
How do I listen to a preset station?
To listen to a preset station, press the BAND button until the desired preset number appears.
How do I adjust the sound settings?
To adjust the sound settings, press the EQ button repeatedly until the desired setting appears.
How do I detach the control panel?
To detach the control panel, press the RELEASE button on the bottom of the unit and slide the panel out.

advertisement

Table of contents