Making sound natural. JVC KD-AR8500, KD-AR8500J, AR8500 - Radio / CD

Making sound natural

To activate Compression

Compensative (CC) Converter

CC Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion. This processing can be applied to the analog sources as well as the digital sources; therefore, you can obtain a natural sound field from any source.

1

Enter the CCC menu (see page 5).

2

Select “On.”

Off

On

To activate BBE Digital

BBE Digital* is a digital processing method to restore the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. BBE Digital adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

1

Enter the BBE menu (see page 5).

2 Select the effect level.

Off

3

1

2

• When “C.C.Conv.” is turned on, the

CCC indicator is brightened in yellow on the display (in sequence with other indicators).

• To cancel CC Converter, select “Off.”

3

Finish the procedure.

Ex.: When “1” is selected

• As the number gets higher, the effect level becomes stronger. When “BBE” is turned on, the BBE indicator is brightened in green (with its current level) on the display (in sequence with other indicators).

• To cancel BBE Digital, select “Off.”

3

Finish the procedure.

* Manufactured under license from BBE Sound,

Inc.

Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

23