PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Add to My manuals
546 Pages

2 Before you start

Before you start any upgrade or maintenance task, please proceed as follows:

Carefully read the safety instructions in chapter "Important information" on page 41 .

Make sure that all necessary manuals are available. Refer to the documentation overview in section

"Documents you need at hand" on page 39 . Print the PDF files if required.

Make yourself familiar with the procedure categories introduced in section

"Classification of procedures" on page 33 .

Ensure that all required tools are available according to section

"Tools you need at hand" on page 37 .

Installing optional components

The "PRIMERGY RX300 S7 Server Operating manual" gives an introduction to server features and provides an overview of available hardware options.

Use the Fujitsu ServerView Suite management software to prepare hardware expansions. ServerView Suite documentation is available online at

http://manuals.ts.fujitsu.com

(

http://jp.fujitsu.com/platform/server/primergy/system/

for the Japanese market) or from the ServerView Suite DVD 2 supplied with your PRIMERGY server. Please refer to the following ServerView Suite topics:

– Operation

– Virtualization

– Maintenance

For the latest information on hardware options, refer to your server’s hardware configurator available online at the following address: for the EMEA market:

http://ts.fujitsu.com/products/standard_servers/rack/primergy_rx300s7.html

for the Japanese market:

http://jp.fujitsu.com/platform/server/primergy/system/

Please contact your local Fujitsu customer service partner for details on how to order expansion kits or spare parts. Use the Fujitsu Illustrated Spares Catalog to identify the required spare part and obtain technical data and order information. Illustrated Spares catalogs are available online at

http://manuals.ts.fujitsu.com/illustrated_spares

(EMEA market only).

RX300 S7

Upgrade and Maintenance Manual 31

Before you start

Replacing a defective component

The global error indicators on the front and rear sides of the server as well as local diagnostic LEDs on the front panel report defective hardware components that need to be replaced. For further information on the controls and indicators of your server, refer to the "PRIMERGY RX300 S7 Server Operating Manual" and section

"Connectors and indicators" on page 531

If the system has been powered off in order to replace a non-hot plug unit, a system of PRIMERGY diagnostic indicators guides you to the defective component. The "Indicate CSS" button enables the indicator next to the defective component even if the server has been switched off and disconnected from the mains. For further information, please refer to sections

"Using diagnostics information" on page 53

and "Connectors and indicators on the front panel" on page 540 .

If the defective component is a customer replaceable unit included in the CSS concept (Customer Self Service, only available for EMEA market), the CSS indicators on the front and rear side of the server will light up.

For further information, refer to the "ServerView Suite Local Service Concept

(LSC)" manual available from the ServerView Suite DVD 2 supplied with your

PRIMERGY server or online at

http://manuals.ts.fujitsu.com

(EMEA market) or

http://jp.fujitsu.com/platform/server/primergy/manual/

(Japanese market).

It is recommended to prepare local maintenance tasks using remote diagnostics procedures, as described in the "ServerView Suite Local Service Concept

(LSC)" manual.

32 Upgrade and Maintenance Manual

RX300