PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

13 Front panel

This chapter provides information on how to replace the front panel module and optional front LAN connector board.

Safety notes

V

CAUTION!

●

When inserting the front panel module into the server, ensure not to pinch or strain any connected cables.

●

●

●

Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Always discharge static build-up

(e.g. by touching a grounded object) before handling electrostaticsensitive devices (ESDs)

Do not touch the circuitry on boards or soldered parts. Hold circuit boards by their metallic areas or edges.

For further information, please refer to chapter "Important information" on page 41 .

RX300 S7

Upgrade and Maintenance Manual 393