PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Basic software procedures

5.2.19 Specifying the chassis model

In order to have your server displayed correctly as a rack system in the

ServerView management user interface after a chassis conversion, the chassis model setting needs to be updated.

This can be accomplished using the ServerView Installation Manager or

Maintenance Tools:

Using the ServerView Installation Manager

Ê

Boot the system from the ServerView Suite DVD 1. The ServerView

Installation Manager is being started.

Ê

Select your preferred user interface language.

Ê

Under Status backup media select No status backup and click Continue.

Ê

Select Maintenance.

Ê

Select Server Configuration Manager.

Ê

Check the box for rack model and save the setting by clicking Save.

Using the ServerView Maintenance Tools

On Windows-based servers with ServerView agents installed, proceed as follows:

Ê

Click Start, point to All Programs, and then point to Fujitsu - ServerView Suite -

Agents - Maintenance Tools.

Ê

In the Maintenance Tools menu pane, click the Chassis Model Configuration tab.

Ê

Under Convert to click the Rack Model button.

Ê

Click Exit to close the Maintenance Tools menu pane.

I

For more detailed information on installing ServerView agents, refer to the "ServerView Operations Manager - Installation ServerView Agents for Windows" user guide available online at

http://manuals.ts.fujitsu.com

or from the ServerView Suite DVD 2 supplied with your PRIMERGY server.

RX300 S7

Upgrade and Maintenance Manual 111

Basic software procedures

112 Upgrade and Maintenance Manual

RX300