PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Basic software procedures

Ê

Press [Esc] to exit the BIOS.

Ê

Inform the customer about the changed MAC address.

5.2.15.2 Looking up WWN addresses

Emulex FC / FCoE adapters

Ê

Enable the network controller’s Option ROM in the system board BIOS as described in section

"Enabling Option ROM scan" on page 96

.

Ê

Restart the server.

Ê

During boot, as soon as the Emulex BIOS utility option appears, press

[ALT]

+[E] or [CTRL]+[E].

Ê

Under Emulex Adapters in the System you will find all available Emulex adapters and their WWN addresses.

Ê

Note down the new 16-digit WWN address.

Ê

Press [Esc] to exit the Emulex BIOS utility.

Ê

Inform the customer about the changed WWN address.

QLogic FC adapters

Ê

Enable the network controller’s Option ROM in the system board BIOS as described in section

"Enabling Option ROM scan" on page 96

.

Ê

Restart the server.

Ê

During boot, as soon as the QLogic BIOS utility option appears, press

[ALT]

+[Q] or [CTRL]+[Q].

Ê

Under Select Host Adapter use the arrow keys æ/Ë to select the desired

FC / FCoE adapter and press [Enter].

Ê

From the Fast!UTIL Options menu, select Configuration Settings, and press

[Enter]

.

Ê

From the Configuration Settings menu, select Adapter Settings, and press

[Enter]

.

Ê

Note down the new 16-digit WWN address found under Adapter Port Name.

Ê

Press [Esc] to return to the main menu and exit the QLogic BIOS utility.

Ê

Inform the customer about the changed WWN address.

108 Upgrade and Maintenance Manual

RX300