PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Basic software procedures

5.1.6

Switching on the ID indicator

When working in a datacenter environment, switch on the ID indicator on the front and rear connector panels of the server for easy identification.

I

For further information, refer to section "Locating the defective server" on page 54

or to the "ServerView Suite Local Service Concept (LSC)" manual available from the ServerView Suite DVD 2 supplied with your

PRIMERGY server or online at

http://manuals.ts.fujitsu.com

(EMEA market) or

http://jp.fujitsu.com/platform/server/primergy/manual/

(Japanese market).

Using the ID button on the front panel

Ê

Press the ID button on the front panel to switch on the system identification

LEDs.

I

For further information, refer to section

"Front panel controls and indicators" on page 541 .

Using ServerView Operations Manager

Ê

In ServerView Operations Manager Single System View and press the Locate button in the title bar to switch on the ID indicators.

RX300 S7

Upgrade and Maintenance Manual 89