PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Basic hardware procedures

4.12 Closing the rack door

The PRIMECENTER M1 rack is equipped with a split front door. The left-hand door contains an interlocking system that can be locked and opened with a key.

Optionally, a revolving door knob can be mounted for key-less locking. To close and lock the rack, proceed as follows:

Ê

Close the right-hand door first, then the left-hand door.

Ê

Insert and turn the key clockwise by 180 degrees.

If applicable, turn the door knob clockwise by 180 degrees.

I

For further information, refer to the "PRIMECENTER Rack System" assembly guide available online at

http://manuals.ts.fujitsu.com

or from the

ServerView Suite DVD 2 supplied with your PRIMERGY server.

RX300 S7

Upgrade and Maintenance Manual 81

Basic hardware procedures

82 Upgrade and Maintenance Manual

RX300