PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Expansion cards and backup units

9.7.1.3

Network adapter D2735

Figure 117: Network adapter D2735 - Mounting the slot bracket (A)

Ê

Place the controller on the mounting tabs on the slot bracket (1).

Ê

Carefully shift the slot bracket towards the controller (2) until the plug shells engage with the cut-outs in the slot bracket connector panel (see close-up).

248 Upgrade and Maintenance Manual

RX300

Expansion cards and backup units

Figure 118: Network adapter D2735 - Mounting the slot bracket (B)

Ê

Secure the slot bracket to the controller with two M3 x 4.5 mm screws.

Figure 119: Network adapter D2735 - Mounting the slot bracket (C)

I

Assembled network adapter D2735

RX300 S7

Upgrade and Maintenance Manual 249

Expansion cards and backup units

9.7.1.4

Network adapter D2745

Figure 120: Network adapter D2745 - Mounting the slot bracket (A)

Ê

Hinge the slot bracket to the plug shell as shown (1).

Ê

Fold the slot bracket towards the controller until the threaded mounting tab is aligned with the screw hole on the controller (2).

250 Upgrade and Maintenance Manual

RX300

Expansion cards and backup units

Figure 121: Network adapter D2745 - Mounting the slot bracket (B)

Ê

Secure the slot bracket to the controller with one M3 x 4.5 mm screw.

Figure 122: Network adapter D2745 - Mounting the slot bracket (C)

I

Assembled network adapter D2745

RX300 S7

Upgrade and Maintenance Manual 251

Expansion cards and backup units

9.7.1.5

Network adapter D2755

Figure 123: Network adapter D2755 - Mounting the slot bracket (A)

Ê

Place the controller on the mounting tabs on the slot bracket (1).

Ê

Carefully shift the slot bracket towards the controller until the plug shells engage with the cut-outs in the slot bracket connector panel (2).

Ê

Ensure that the ESD springs on the plug shells properly engage with the slot bracket as shown (see close-ups).

252 Upgrade and Maintenance Manual

RX300

Expansion cards and backup units

Figure 124: Network adapter D2755 - Mounting the slot bracket (B)

Ê

Secure the slot bracket to the controller with two M3 x 4.5 mm screws.

Figure 125: Network adapter D2755 - Mounting the slot bracket (C)

RX300 S7

Upgrade and Maintenance Manual 253