PRIMERGY RX300 S7 Server Upgrade and Maintenance Manual

Accessible drives

Ê

"Removing the server cover" on page 69

Ê

"Removing the air duct" on page 70

Ê

"Removing the fan box" on page 176

12.10.3 Removing the defective RDX/DAT drive

Ê

"Removing the drive cage" on page 357

Ê

"Removing an RDX/DAT drive out of the cage" on page 358

12.10.4 Installing the new RDX/DAT drive

Ê

"Installing an RDX/DAT drive in the cage" on page 352

Ê

"Installing the RDX/DAT drive" on page 353

12.10.5 Concluding steps

Perform the following procedures:

Ê

"Installing the fan box" on page 177

Ê

"Installing the air duct" on page 71

Ê

"Mounting the server cover" on page 73

Ê

"Sliding the server into the rack" on page 77

If the server has been completely removed from the rack for maintenance purposes, reinstall and secure it in the rack as described in section

"Mounting the server in the rack" on page 74

.

Ê

"Connecting the server to the mains" on page 78

Ê

"Closing the rack door" on page 81

Ê

"Verifying and configuring the backup software solution" on page 97

Ê

"Enabling BitLocker functionality" on page 106

RX300 S7

Upgrade and Maintenance Manual 361