Port C Pull-Down Selection Register – PCPDR. Holtek HT32F5828

32-Bit Arm ®

HT32F5828

Cortex ® -M0+ MCU

Port C Pull-Down Selection Register – PCPDR

This register is used to enable or disable the GPIO Port C pull-down function.

Offset: 0x00C

Reset value: 0x0000_0000

31 30 29 28 27

Reserved

26 25 24

Type/Reset

23 22 21 20 19

Reserved

18 17 16

Type/Reset

15 14 13 12 11

PCPD

10 9 8

Type/Reset RW 0 RW 0 RW 0 RW 0 RW 0 RW 0 RW 0 RW 0

7 6 5 4 3 2 1 0

PCPD

Type/Reset RW 0 RW 0 RW 0 RW 0 RW 0 RW 0 RW 0 RW 0

Bits

[15:0]

Field

PCPDn

Descriptions

GPIO Port C pin n Pull-Down Selection Control Bits (n = 0 ~ 15)

0: Pin n pull-down function is disabled

1: Pin n pull-down function is enabled

Note: When the pull-up and pull-down functions are both enabled, the pull-up function will have the higher priority and therefore the pull-down function will be blocked and disabled.

Rev. 1.00 165 of 637 December 28, 2020