1.5.10 Trim Ring. Notifier AFP-200

Intelligent Detectors

System Overview

1.5.10 Trim Ring

The TR-4XG gray trim ring is available for semi-flush mounting of the control panel cabinet. See Figure 7 on page 29 for an illustration of the trim ring installed.

1.5.11 Battery Box

The BB-17 battery box may be used to mount two 18 AH batteries. The box mounts directly below the control panel cabinet. See Figure 6 on page 28 for an illustration of the battery box dimensions.

1.5.12 Dress Panel

A dead front dress panel (DP-AFP200) is available as an option (required for Canadian and FM installations).

1.5.13 Expansion Power Supplies

(AVPS-24 and APS-6R)

Power supply model AVPS-24/AVPS-24E provides an additional 3 amps of notification appliance power

(Appendix J “Expansion Power Supplies”) and the APS-6R provides 6 amps of additional notification appliance power. Refer to the Device Compatibility Document for compatible notification appliances.

1.5.14 Marine Cabinet

Cabinet CAB-AM is required for applications requiring United States Coast Guard or

Lloyd’s Register approvals. Refer to Appendix L “U.S. Coast Guard & Lloyd’s

Register” on page 187.

1.6 Intelligent Detectors

Intelligent, addressable detectors provide analog information to the control panel on a

Signaling Line Circuit (SLC). This allows the control panel to continually process this information to determine the status of each detector (alarm, trouble, maintenance, or normal). Each detector responds to an SLC address that is set in the detector head using built-in rotary decimal switches. The sensitivity of each intelligent detector can be programed at the control panel. (Refer to Section 3 “Programming” for details.)

Detector heads mount to a separate base for ease of installation and replacement, as described below.

A blinking LED on an intelligent detector indicates communication between the detector and the control panel.

Detectors

•

FSI-751.

Analog, addressable, low profile intelligent smoke detector that incorporates an ionization sensing chamber. Designed to provide open area protection.

•

FSP-751.

Same as FSI-751, but uses a photoelectric sensing chamber. The

FSP-751T

adds thermal sensors that will alarm at a fixed temperature of 135° F. Designed to provide open area protection.

FSI-751, FSP-751

AFP-200 PN 15511:H2 10/14/2002

Technical Manuals Online! - http://www.tech-man.com

21