advertisement
NFPA Applications
Section Overview
Appendix B NFPA Applications
B.1 Section Overview
B.1.1 Specific Requirements
The control panel is designed for use in commercial, industrial, and institutional applications and meets the requirements for service under the National Fire Protection
Association (NFPA) Standards outlined in this appendix. The minimum system components required for compliance with the appropriate NFPA standard are listed below.
• AFP-200 control panel containing the main circuit board, cabinet (backbox and door), main supply transformer and power supply.
• Batteries (refer to Appendix A for standby power requirements).
• Initiating devices connected to the control panel’s signaling line circuit.
• Notification appliances connected to the control panel’s Notification Appliance
Circuit or via a control module.
B.1.2 Additional Requirements
Table 50 contains additional equipment that is needed for compliance with the NFPA standards listed below:
NFPA Standard
NFPA 72 Central
Station Fire Alarm
Systems
(Protected
Premises Unit)
NFPA 72 Auxiliary
Fire Alarm System
NFPA 72 Remote
Station Fire Alarm
System
NFPA 72
Proprietary Fire
Alarm System
Application
DACT
Universal Digital Alarm
Communicator/Transmitter or Notifier 911AC
DACT for connection to a compatible
UL-listed Central Station DACR or Protected
Premises Receiving Unit.
RTM-8
Relay Transmitter Module or 4XTM
Transmitter Module for connection to a compatible UL-listed Local Energy Municipal
Box.
RTM-8
Relay Transmitter Module or 4XTM
Transmitter Module for connection to the
Fire•Lite RS-82 Remote Station Receiver. or
UDACT
Universal Digital Alarm
Communicator/Transmitter or Notifier 911AC
DACT for connection to a compatible
UL-listed remote station DACR.
NIB-96
Network Interface Board. The
NIB-96 must be installed in the receiving system.
Refer to
“Central Station Fire
Alarm Systems
(Protected Premises)” on page 133
“NFPA 72 Auxiliary Fire
Alarm System” on page
135
“Wiring a Remote Station
Fire Alarm System” on page 136
“Installing a UDACT” on page 134 and “Installing a Notifier 911AC” on page 133.
“NFPA 72 Proprietary
Fire Alarm Systems” on page 138 and the NIB-96
Manual, Document
15666.
Table 50 Additional Equipment for NFPA Applications
132
Technical Manuals Online! - http://www.tech-man.com
AFP-200 PN 15511:H2 10/14/2002
advertisement
Key Features
- Early fire detection through smoke, heat, and flame detectors
- Manual pull stations for immediate alarm activation
- Audible and visual warning devices for effective alerting
- Remote notification capabilities for rapid emergency response
- Complies with industry standards such as NFPA 72
Related manuals
Frequently Answers and Questions
What types of detectors does the AFP-200 support?
How does the system alert individuals to danger?
What is the purpose of remote notification capabilities?
advertisement