Accessing Alter Status Options. Notifier AFP-200

Terminal Interface Protocol

Using the CRT-2 for Alter Status

I.4.2 Accessing Alter Status Options

Access the Alter Status function from the CRT-2 by following these steps.

1. Turn on the CRT-2 connected to the control panel.

2. Press the Alter Status function key. The control panel displays the Alter Status menu options:

Press

C

Enter Status Change Password or Escape to Abort

3. Enter the Status Change Password. The factory default Status Change Password is

11111. The password does not display on the CRT-2. Five asterisks will appear in place of the password:

Press

11111

W

Press

1

*****

The Alter Status Options menu appears:

1=Disable 2=Sensitivity 3=Clear Verification 4=Clear History 5=Set Action/Alert

From the Alter Status Options menu, you can select options 1-5.

I.4.3 Enable or Disable Detectors, Modules, or Bell Circuits

From the Alter Status menu, select Disable, option

1

. Disable lets you enable or disable detectors, modules, or bell Circuits:

Address or number

Disable/Enable D(Det.) / M(Mod.) / B(Bell ckt.), AA

Enter the following:

1. Enter the first letter to read one of the following:

•

D

etector

•

M

odule

•

B

ell Circuit (NAC)

2. Enter the address or number of the device.

3. Press <Enter> and a display similar to the following will appear.

174

Technical Manuals Online! - http://www.tech-man.com

AFP-200 PN 15511:H2 10/14/2002