advertisement
Installation Checklist
2.2 Installation Checklist
Installation
!
!
!
CAUTION: Make sure to install system components in the precise order in the checklist. Failure to do so can damage the control panel and other system components
Table 6 contains an installation checklist for installing, wiring, and testing an AFP-200 system:
Task Refer to
Mount the cabinet backbox to the wall.
If using expansion power supplies, mount the expansion power supply to the backbox.
CAUTION: Connect the AC power cable and DC battery cables.
CAUTION: Do not connect power at this time!
Mount an optional module (RTM-8 or 4XTM).
Install optional peripheral devices, such as a printer, personal computer, or CRT-2 terminal.
Wire the Signaling Line Circuits.
Connect AC power to control panel — but do not connect batteries.
Check AC power—but do not connect batteries.
Program the control panel.
Connect the batteries.
Walk test the system.
“Backbox Mounting” on page 32
Appendix J “Expansion Power
Supplies”
“AC and DC Power Connections” on page 33
“Option Module Installation” on page 61
“EIA-232 Devices – Remote
Printers and CRTs (TB4)” on page 37
“Wiring a Signaling Line Circuit
(SLC)” on page 41
“AC Power Connections (TB7)” on page 33
Table 7
Section 3 “Programming”
“Battery Power Connection (J3)” on page 34
“How to do a Walk Test (6=walk test)” on page 99
Table 6 Installation Checklist
Table 7 contains a checklist for checking the system with AC power applied:
CAUTION: While checking AC power, make sure batteries are not connected.
Component Status
The CPU option module
AVPS-24/AVPS-24E or APS-6R
The green AC Power indicator on; the system Trouble indicator on because of no battery power.
The yellow Trouble indicator may come on for approximately 10 seconds after applying AC power. (This only applies to an unconfigured system.)
The yellow Trouble indicator comes on because batteries are not connected.
Table 7 AC Power Checklist
AFP-200 PN 15511:H2 10/14/2002
Technical Manuals Online! - http://www.tech-man.com
31
advertisement
Key Features
- Early fire detection through smoke, heat, and flame detectors
- Manual pull stations for immediate alarm activation
- Audible and visual warning devices for effective alerting
- Remote notification capabilities for rapid emergency response
- Complies with industry standards such as NFPA 72
Related manuals
Frequently Answers and Questions
What types of detectors does the AFP-200 support?
How does the system alert individuals to danger?
What is the purpose of remote notification capabilities?
advertisement