Organization. Fuji Xerox DocuPrint CP225 w

Below you will find brief information for Printer CP225 w. This guide provides operating information for the printer's print function. Explore features like easy wireless setup, manual duplex printing, and multiple up printing to conserve paper. Secure Print lets you temporarily store print data for later, and the wireless LAN feature lets you print without a wired connection. Understand the printer's components and menus to maximize use.

PDF

Document

Using This Guide



Organization

This guide is organized into the following chapters. The summary of each chapter is as follows:

Specifications

Basic Operation

Printer Management Software

Printer Connection and Software

Installation

Printing Basics

Using the Operator Panel Menus

Troubleshooting

Maintenance

Contacting Fuji Xerox

Describes the printer specifications.

Describes the main components of the printer, the power saver mode, and how to turn on/off the printer.

Describes the software available for the printer.

Describes the basic information about how to connect the printer to your computer and how to install the print driver.

Describes the supported paper, how to load paper, and how to print data using various print features.

Describes the setting items available on the operator panel, and their setup procedures.

Describes the troubleshooting tips for printer problems such as paper jams.

Describes how to clean the printer, how to replace toner cartridges, and how to see the printer status.

Describes support information.



Conventions

•

• In this guide, personal computers and workstations are collectively called "computers".

The following terms are used throughout this guide:

IMPORTANT:

• Important information that must be read and followed.

NOTE:

• Additional information that merits emphasis.

•

See also:

• References within this guide.

Orientation of documents or paper is described in this guide as follows:

, , Long Edge Feed (LEF): Loading the document or paper in landscape orientation.

, , Short Edge Feed (SEF): Loading the document or paper in portrait orientation.

LEF Orientation SEF Orientation

Paper feed direction Paper feed direction

• Some of the items in the screen shots and illustrations may not be displayed or available depending on your printer model.

Using This Guide

Product Features

Easy Wireless Connection Set Up (EZInstall) Manual Duplex Print

You can easily connect the printer to a wireless network by using the installer on the

Software Pack CD-ROM

For more information, see "Configuring Wireless

Connection Settings" on page 46.

The duplex print feature allows you to print two or more pages on the front and back sides of a single sheet of paper manually. This feature helps reduce paper consumption.

For more information, see "Manual Duplex Printing" on page 84.

Multiple Up Print Printing Through Wireless Connection (Wireless

Print)

The multiple up print feature allows you to print multiple pages on a single sheet of paper. This feature helps reduce paper consumption.

For more information, refer to the Help provided for the print driver.

The wireless LAN feature on your printer allows you to install the printer at any location, and enables printing without a wired connection to your computer.

For more information, see "Wireless Connection" on page 35.

Secure Print

The Secure Print feature allows you to temporarily store your print data in the printer memory and output it later.

You can effectively manage your time when you print confidential data or large-volume data at off-peak hours.

For more information, see "Using the Secure Print

Feature" on page 88.

Product Features

Fuji Xerox Imaging Technology

Conventional technology

Jagged line

Enhanced image

Smooth line

This printer reproduces smooth lines and gradations by 1200



2400 dpi high-resolution LED print heads and Micro

Accurate Control Screen (MACS) Technology.

In addition, the color registration of each toner is corrected with ultra high precision through a digital process by

Image Registration Control Technology (IReCT).

Product Features

Specifications

This chapter lists the main specifications of the printer. Note that the specifications of the product may change without prior notice.

Product Code

Items

Type

Printing Method

Warm-Up Time

Continuous Print Speed

First Print

Resolution

Tone/Color

Paper Size

Paper Weight

Paper Capacity

Output Tray Capacity

2-sided Printing Feature

Description

DocuPrint CP225 w 220V: TL300870

DocuPrint CP225 w 110V: TL300873

Desktop

LED Xerography

IMPORTANT:

• LED + LED electrophotographic system

28 seconds or less (at 22°C room temperature)

Color 1 Sided: 18 sheets/min

Monochrome 1 Sided: 18 sheets/min

IMPORTANT:

•

Print speed may decrease due to factors such as paper type, paper size, and printing conditions.

When continuously printing a single document of A4 .

Color: 15.0 seconds (A4 )

Monochrome: 12.5 seconds (A4 )

IMPORTANT:

• The values may vary depending on the machine configuration.

Data Processing Resolution: 600



600 dpi

Output Resolution: 1200



2400 dpi

256 tones/color (16.7 million colors)

A4 (210



297 mm), B5 (182



257mm), A5 (148



210mm), C5 (162



229 mm),

Monarch (3.875



7.5"), Com 10 (4.125



9.5"), DL (110



220 mm),

Letter (8.5



11"), Legal (8.5



14"), Folio (8.5



13"), Executive (7.25



10.5"),

Custom Size: 76.2 – 215.9 mm



127 – 355.6 mm

Image loss: 4 mm from the top, bottom, left, and right edges

60 – 163 gsm

IMPORTANT:

•

Use only the recommended paper. Using paper other than that recommended for the printer can cause printing problems. Do not use special ink jet paper.

The type of paper being used and environmental conditions can affect printing quality. Because of this, it is recommended to perform a test print and confirm proper print quality before using the printer.

150 sheets

IMPORTANT:

• Fuji Xerox P paper (64 gsm)

Approximately 100 sheets (face down)

IMPORTANT:

• Fuji Xerox P paper (64 gsm)

Standard (Manual)

Specifications

Items

Memory Capacity

Fonts

Page Description Language

Emulation

Description

Standard: 256 MB (Onboard)

Optional: —

IMPORTANT:

• The above memory capacity does not guarantee print quality depending on the type and content of print data.

PCL/PostScript 3 Compatible: 80 fonts and 36 Symbol Sets

PCL 5c, PDF, TIFF, JPEG, AirPrint, Google Cloud Print™

PCL 6, PostScript 3 Compatible

Specifications

Supported OS

Items

Interface

Description

PCL6 driver:

Microsoft

Windows Server

2003 (32-bit)

Microsoft

Windows Server

2003 R2 (32-bit)

Microsoft

Windows Vista

(32-bit)

Microsoft

Windows Server

2008 (32-bit)

Microsoft

Windows

Microsoft

Windows

7 (32-bit)

8 (32-bit)

Microsoft

Windows

8.1 (32-bit)

Microsoft

Windows Server

2003 (64-bit)

Microsoft

Windows Server

2003 R2 (64-bit)

Microsoft

Windows Vista

(64-bit)

Microsoft

Windows Server

2008 (64-bit)

Microsoft

Windows

7 (64-bit)

Microsoft

Windows Server

2008 R2 (64-bit)

Microsoft

Windows

8 (64-bit)

Microsoft

Windows Server

2012 (64-bit)

Microsoft

Windows

8.1 (64-bit)

Microsoft

Windows Server

2012 R2 (64-bit)

PostScript 3 Compatible:

Microsoft

Windows Server

2003 (32-bit)

Microsoft

Windows Server

2003 R2 (32-bit)

Microsoft

Windows Vista

(32-bit)

Microsoft

Windows Server

2008 (32-bit)

Microsoft

Windows

7 (32-bit)

Microsoft

Windows

Microsoft

Windows

8 (32-bit)

8.1 (32-bit)

Microsoft

Windows Server

2003 (64-bit)

Microsoft

Windows Server

2003 R2 (64-bit)

Microsoft

Windows Vista

(64-bit)

Microsoft

Windows Server

2008 (64-bit)

Microsoft

Windows

7 (64-bit)

Microsoft

Windows Server

2008 R2 (64-bit)

Microsoft

Windows

8 (64-bit)

Microsoft

Windows Server

2012 (64-bit)

Microsoft

Windows

8.1 (64-bit)

Microsoft

Windows Server

2012 R2 (64-bit)

Mac OS X 10.5 Leopard

Mac OS X 10.6 Snow Leopard

Mac OS X 10.7 Lion

OS X 10.8 Mountain Lion

OS X 10.9 Mavericks

Red Hat

Enterprise Linux

6 Desktop (32-bit)

SUSE

Linux Enterprise Desktop 11 (32-bit)

Ubuntu

12.04 (32-bit)

Red Hat

Enterprise Linux

6 Desktop (64-bit)

SUSE

Linux Enterprise Desktop 11 (64-bit)

Ubuntu

12.04 (64-bit)

IMPORTANT:

• For information about the latest supported OS, refer to the Fuji Xerox web site.

USB 2.0 (Hi-Speed), Ethernet (10Base-T/100Base-TX),

IEEE 802.11b/802.11g/802.11n

Specifications

Items

Supported Protocol

Power Supply

Operating Noise

Power Consumption

Dimensions

Weight

Usage Environment

Description

TCP/IP (IPv4/IPv6, LPD, IPP, IPPS, Port9100, WSD, HTTP, HTTPS, RARP,

AutoIP), SNMP, DHCP, DHCPv6, BOOTP, Bonjour (mDNS), AirPrint, Google

Cloud Print

NOTE:

• WSD stands for Web Services on Devices.

AC 100 – 127 V ± 10%; 7 A; both 50/60 Hz ± 3 Hz

AC 220 – 240 V ± 10%; 5 A; both 50/60 Hz ± 3 Hz

IMPORTANT:

• Power outlets that provide the above power level are recommended.

During operation:

Color: 6.4 B; 49.1 dB (A)

Monochrome: 6.4 B; 48.2 dB (A)

During stand-by: 3.5 B; 19.6 dB (A)

IMPORTANT:

• Measurements based on ISO7779

Unit B: acoustic power level (LwAd)

Unit dB (A): radiated sound pressure (bystander position)

Maximum: 605 W, During sleep mode of power saver mode: 1.6 W or less

Average:

During standby: 38 W

During continuous color printing: 281 W

During continuous monochrome printing: 320 W

IMPORTANT:

• Low power mode of power saver mode: 10 W average

(The printer does not use electricity when the power is switched off even with the power cord is plugged in.)

397 (W)



398 (D)



246 (H) mm

Approximately 12.3 kg (including toner cartridges)

During Use: Temperature: 10 – 32°C; Humidity: 10 – 85% (except malfunctions due to dew condensation)

Non-Use: Temperature: -20 – 40°C; Humidity: 5 – 85% (except malfunctions due to dew condensation)

IMPORTANT:

• Until the conditions (temperature and humidity) inside the printer become acclimated to the installation environment, certain conditions of paper can cause poor printing quality.

Specifications

Basic Operation

•

"Main Components" on page 17

"Turning On/Off the Printer" on page 20

"Printing a Panel Settings Page" on page 21

"Power Saver Mode" on page 22

Basic Operation

Key features

Easy Wireless Connection Setup
Manual Duplex Print
Multiple Up Print
Secure Print
Wireless Print

Frequently asked questions

Connect the power cord to the power connector and the power source, then turn on/off the printer by pressing the power switch.

The printer supports A4, B5, A5, C5, Monarch, Com 10, DL, Letter, Legal, Folio, Executive, and custom sizes.

The document does not describe the process how to manually duplex print.

User questions

Robert C.

How to connect a printer to a wireless network using WPS-PIN?

Access the printer's Admin Menu. 2. Go to Network > WPS Setup > PIN Code. 3. Note the 8-digit PIN. 4. Start Configuration and select your wireless access point. 5. Enter the PIN into your access point within two minutes. A lit Wi-Fi LED confirms connection.

Mary N.

How to reset the camera?

To perform a factory reset, locate the reset button on the device, usually a small pinhole. Use a paperclip to press and hold the button for about 10-15 seconds until the indicator light changes, then release. The camera will then restart.

Patricia Q.

How to clean the CTD sensor?

To clean the Color Toner Density (CTD) sensor:

Open the toner access cover on the printer.
Locate the CTD sensor inside the printer.
Gently clean the CTD sensor with a soft, dry cloth. Be careful not to damage the sensor.
Close the toner access cover.

Mary N.

How to install the camera?

To install the camera, first ensure your Wi-Fi network is stable. Then, download the companion app from your app store, create an account, and follow the on-screen instructions to pair the camera. Mount the camera in your desired location using the provided mounting kit.

Mary N.

What is the purpose of the motion detection feature?

The motion detection feature allows the camera to automatically detect movement within its field of view and send instant alerts to your smartphone. Sensitivity settings and detection zones can be customized within the app.