Understanding Printer Messages. Fuji Xerox DocuPrint CP225 w

Below you will find brief information for Printer CP225 w. This guide provides operating information for the printer's print function. Explore features like easy wireless setup, manual duplex printing, and multiple up printing to conserve paper. Secure Print lets you temporarily store print data for later, and the wireless LAN feature lets you print without a wired connection. Understand the printer's components and menus to maximize use.

PDF

Document

Understanding Printer Messages

The printer LCD panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This section describes error codes included in the messages, their meanings, and how to clear the messages.

IMPORTANT:

• When an error code is displayed, the print data remaining on the printer and the information accumulated in the memory of the printer are not secured.

Error-Code

009-950

009-951

009-952

009-953

010-397

016-501

016-502

What You Can Do

Replace the specified toner cartridge.

See also:

•

"Replacing Toner Cartridges" on page 169

016-719

016-720

016-744

016-745

016-749

016-753

016-755

016-920

016-921

016-982

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Press the button to cancel the current job. Retry when the printer does not process any job.

Press the button to cancel the current print job.

See also:

•

"Canceling a Print Job" on page 87

Press the button to cancel the current job. Retry when the printer does not process any job.

PDL emulation error has occurred. Press the current print job.

button to clear the message and cancel the

Press the button. Execute the operation again according to the operation procedure.

018-338

024-340

024-360

024-371

024-946

024-958

024-963

041-340

042-358

042-372

061-370

The printer memory is full and cannot continue processing the current print job. Press the button to clear the message and cancel the current print job.

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Turn off the printer, and then on. Or, unplug the Ethernet cable or USB cable, and then plug it again.

If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Press the button to clear the message. Check for any misfed paper in the standard 150 sheet tray, and set the tray to the printer.

Load the correct paper.

See also:

•

"Loading Print Media in the Standard 150 Sheet Tray" on page 79

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Troubleshooting

159

160

Error-Code

075-100

077-100

077-104

077-106

077-108

077-109

077-304

077-900

077-901

091-402

091-441

092-651

092-661

092-310

092-910

093-930

093-931

093-932

093-933

093-960

093-961

093-962

093-926

093-423

093-424

093-425

093-426

093-919

093-920

093-921

093-922

Troubleshooting

What You Can Do

Check and clear the paper path, load the specified paper, and then press the

See also:

•

"Clearing Paper Jams From the Front of the Printer" on page 134

Check and clear the paper path.

See also:

•

"Clearing Paper Jams From the Rear of the Printer" on page 135

Check and clear the paper path.

See also:

•

"Clearing Paper Jams From the Center Output Tray" on page 137

Close the rear cover.

Check and clear the paper path.

button.

See also:

•

"Clearing Paper Jams From the Center Output Tray" on page 137

Check and clear the paper path.

See also:

•

"Clearing Paper Jams From the Rear of the Printer" on page 135

The service life of your printer is coming to an end, and the printer will soon stop running.

If you want to keep using the printer, change the

Machine Life

setting to

Continue Print

However, continuous use of the printer will degrade the print quality.

See also:

•

"Machine Life" on page 116

The printer has exceeded its service life or the settings have been changed to continue using it. The quality of printouts will degrade if the printer continues to be used.

See also:

•

"Machine Life" on page 116

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Clean the CTD sensor.

See also:

•

"Cleaning the Color Toner Density (CTD) Sensor" on page 168

Replace the specified toner cartridge soon.

See also:

•

"Replacing Toner Cartridges" on page 169

Re-install the specified toner cartridge, turn off the printer, and then on.

See also:

•

"Replacing Toner Cartridges" on page 169

Remove the specified toner cartridge and install a new one. If you do not replace the toner cartridge, print quality problems may occur.

See also:

•

"Replacing Toner Cartridges" on page 169

Re-install the specified toner cartridge with the supported one.

See also:

•

"Replacing Toner Cartridges" on page 169

Error-Code

093-970

093-971

093-972

093-973

116-314

116-355

116-703

116-720

124-333

191-310

191-311

XXX-XXX

What You Can Do

Re-install the specified toner cartridge.

See also:

•

"Replacing Toner Cartridges" on page 169

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

PDL emulation error has occurred. Press the current print job.

button to clear the message and cancel the

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Although the service life of your printer has been over and the printer stopped running, you can still use the printer by pressing the (

Back

) button and the continuous use of the printer will degrade the print quality.

button at the same time. However,

See also:

•

"Machine Life" on page 116

The life of your printer has been over, and you can no longer use the printer.

Turn off the printer, and then on. If this does not solve the problem, contact the Fuji Xerox local representative office or an authorized dealer.

See also:

•

"Online Services" on page 183

Troubleshooting

161

Key features

Easy Wireless Connection Setup
Manual Duplex Print
Multiple Up Print
Secure Print
Wireless Print

Frequently asked questions

Connect the power cord to the power connector and the power source, then turn on/off the printer by pressing the power switch.

The printer supports A4, B5, A5, C5, Monarch, Com 10, DL, Letter, Legal, Folio, Executive, and custom sizes.

The document does not describe the process how to manually duplex print.

User questions

Robert C.

How to connect a printer to a wireless network using WPS-PIN?

Access the printer's Admin Menu. 2. Go to Network > WPS Setup > PIN Code. 3. Note the 8-digit PIN. 4. Start Configuration and select your wireless access point. 5. Enter the PIN into your access point within two minutes. A lit Wi-Fi LED confirms connection.

Mary N.

How to reset the camera?

To perform a factory reset, locate the reset button on the device, usually a small pinhole. Use a paperclip to press and hold the button for about 10-15 seconds until the indicator light changes, then release. The camera will then restart.

Patricia Q.

How to clean the CTD sensor?

To clean the Color Toner Density (CTD) sensor:

Open the toner access cover on the printer.
Locate the CTD sensor inside the printer.
Gently clean the CTD sensor with a soft, dry cloth. Be careful not to damage the sensor.
Close the toner access cover.

Mary N.

How to install the camera?

To install the camera, first ensure your Wi-Fi network is stable. Then, download the companion app from your app store, create an account, and follow the on-screen instructions to pair the camera. Mount the camera in your desired location using the provided mounting kit.

Mary N.

What is the purpose of the motion detection feature?

The motion detection feature allows the camera to automatically detect movement within its field of view and send instant alerts to your smartphone. Sensitivity settings and detection zones can be customized within the app.