Adjusting Color Registration. Fuji Xerox DocuPrint CP225 w

Below you will find brief information for Printer CP225 w. This guide provides operating information for the printer's print function. Explore features like easy wireless setup, manual duplex printing, and multiple up printing to conserve paper. Secure Print lets you temporarily store print data for later, and the wireless LAN feature lets you print without a wired connection. Understand the printer's components and menus to maximize use.

PDF

Document

Adjusting Color Registration

This section describes how to adjust the color registration when you first install the printer or after moving it to a new location.



Performing Auto Correct

Auto Correct allows you to correct the color registration automatically.

Using the Operator Panel

Press the (

Menu

) button.

Select

Admin Menu

, and then press the

Select

Maintenance

, and then press the

button.

Select

Adjust ColorRegi

, and then press the

Select

Auto Adjust

, and then press the button.

button.

Confirm that

Are you sure?

appears.

Select

Yes

, and then press the

Auto Correct is performed.

button.

Using the Printer Setting Utility (Windows Only)

The following procedure uses Windows 7 as an example.

Click

Start



All Programs



Fuji Xerox



Fuji Xerox Printer Software for Asia-Pacific

 your printer 

Printer Setting Utility

NOTE:

• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this case, click the name of the desired printer listed in

Printer Name

The Printer Setting Utility opens.

Click the

Printer Maintenance

tab.

Select

Registration Adjustment

from the list at the left side of the page.

The

Registration Adjustment

page is displayed.

Deselect the check box next to

Click

Start

next to

Auto Correct

The color registration is corrected automatically.

152

Troubleshooting



Printing the Color Registration Chart

Using the Printer Setting Utility (Windows Only)

The following procedure uses Windows 7 as an example.

Click

Start



All Programs



Fuji Xerox



Fuji Xerox Printer Software for Asia-Pacific

 your printer 

Printer Setting Utility

NOTE:

• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this case, click the name of the desired printer listed in

Printer Name

The Printer Setting Utility opens.

Click the

Printer Maintenance

tab.

Select

Registration Adjustment

from the list at the left side of the page.

The

Registration Adjustment

page is displayed.

Deselect the check box next to

Click

Start

next to

Print Color Regi Chart

The color registration chart is printed.



Determining Values

On the color registration chart printed, find the straightest lines where the two black lines and the colored line are most closely aligned for each color (Y, M, and C).

If you find the straightest line, make a note of the value (-5 – +5) indicated by the straightest line for each color.

When the value is 0 for each color, you do not need to adjust the color registration.

When the value is not 0, enter the value according to the procedure in "Entering Values" on page 154.

Troubleshooting

153



Entering Values

Using the Printer Setting Utility (Windows Only)

Enter the values that you found in the color registration chart to make adjustments.

The following procedure uses Windows 7 as an example.

Click

Start



All Programs



Fuji Xerox



Fuji Xerox Printer Software for Asia-Pacific

 your printer 

Printer Setting Utility

NOTE:

• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this case, click the name of the desired printer listed in

Printer Name

The Printer Setting Utility opens.

Click the

Printer Maintenance

tab.

Select

Registration Adjustment

from the list at the left side of the page.

The

Registration Adjustment

page is displayed.

Deselect the check box next to

Select the value you checked in the color registration chart, and then click

Apply New Settings

Click

Start

next to

Print Color Regi Chart

The color registration chart is printed with the new values.

Adjust until all straight lines are at the value of 0.

Viewing the images before and after will help.

IMPORTANT:

• After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.

154

Troubleshooting

Key features

Easy Wireless Connection Setup
Manual Duplex Print
Multiple Up Print
Secure Print
Wireless Print

Frequently asked questions

Connect the power cord to the power connector and the power source, then turn on/off the printer by pressing the power switch.

The printer supports A4, B5, A5, C5, Monarch, Com 10, DL, Letter, Legal, Folio, Executive, and custom sizes.

The document does not describe the process how to manually duplex print.

User questions

Robert C.

How to connect a printer to a wireless network using WPS-PIN?

Access the printer's Admin Menu. 2. Go to Network > WPS Setup > PIN Code. 3. Note the 8-digit PIN. 4. Start Configuration and select your wireless access point. 5. Enter the PIN into your access point within two minutes. A lit Wi-Fi LED confirms connection.

Mary N.

How to reset the camera?

To perform a factory reset, locate the reset button on the device, usually a small pinhole. Use a paperclip to press and hold the button for about 10-15 seconds until the indicator light changes, then release. The camera will then restart.

Patricia Q.

How to clean the CTD sensor?

To clean the Color Toner Density (CTD) sensor:

Open the toner access cover on the printer.
Locate the CTD sensor inside the printer.
Gently clean the CTD sensor with a soft, dry cloth. Be careful not to damage the sensor.
Close the toner access cover.

Mary N.

How to install the camera?

To install the camera, first ensure your Wi-Fi network is stable. Then, download the companion app from your app store, create an account, and follow the on-screen instructions to pair the camera. Mount the camera in your desired location using the provided mounting kit.

Mary N.

What is the purpose of the motion detection feature?

The motion detection feature allows the camera to automatically detect movement within its field of view and send instant alerts to your smartphone. Sensitivity settings and detection zones can be customized within the app.