Power Saver Mode. Fuji Xerox DocuPrint CP225 w

Below you will find brief information for Printer CP225 w. This guide provides operating information for the printer's print function. Explore features like easy wireless setup, manual duplex printing, and multiple up printing to conserve paper. Secure Print lets you temporarily store print data for later, and the wireless LAN feature lets you print without a wired connection. Understand the printer's components and menus to maximize use.

PDF

Document

Power Saver Mode

The printer has a power saving feature which reduces power consumption during periods of inactivity. This feature operates in two modes: low power mode and sleep mode. As delivered, the printer switches to the low power mode five minutes after the last job is finished. The printer then switches to the sleep mode after another six minutes of inactivity. When the printer is in the low power mode, the display shows

Ready to Print

and the LCD backlight turns off. In the sleep mode, all lamps on the operator panel except for the (

Power Saver

) button go out. The display goes blank and nothing more appears.

The factory default settings of five minutes (Low Power Timer) and six minutes (Sleep Timer) are changeable within the range of 5 to 30 minutes (Low Power Timer) and 1 to 6 minutes (Sleep Timer). The printer returns to the ready-toprint state in about 28 seconds when re-activated.



Exiting the Power Saver Mode

The printer automatically exits the power saver mode when it receives a job from a computer. To manually exit the low power mode, press any button on the operator panel. To exit the sleep mode, press the (

Power Saver

) button.

NOTE:

• When the printer is in the sleep mode, all buttons on the operator panel except for the function. To use the buttons on the operator panel, press the (

Power Saver

(

Power Saver

) button do not

) button to exit the power saver mode.

See also:

•

"Setting the Time for the Power Saver Mode" on page 125

Basic Operation

Printer Management Software

Use the

Software Pack CD-ROM

that shipped with your printer to install a combination of software programs, depending on your operating system.

•

"Print Driver" on page 24

"CentreWare Internet Services" on page 25

•

"Printer Setting Utility (Windows Only)" on page 26

"SimpleMonitor (Windows Only)" on page 27

"Launcher (Windows Only)" on page 28

"Setup Disk Creation Tool (Windows Only)" on page 29

Printer Management Software

Key features

Easy Wireless Connection Setup
Manual Duplex Print
Multiple Up Print
Secure Print
Wireless Print

Frequently asked questions

Connect the power cord to the power connector and the power source, then turn on/off the printer by pressing the power switch.

The printer supports A4, B5, A5, C5, Monarch, Com 10, DL, Letter, Legal, Folio, Executive, and custom sizes.

The document does not describe the process how to manually duplex print.

User questions

Robert C.

How to connect a printer to a wireless network using WPS-PIN?

Access the printer's Admin Menu. 2. Go to Network > WPS Setup > PIN Code. 3. Note the 8-digit PIN. 4. Start Configuration and select your wireless access point. 5. Enter the PIN into your access point within two minutes. A lit Wi-Fi LED confirms connection.

Mary N.

How to reset the camera?

To perform a factory reset, locate the reset button on the device, usually a small pinhole. Use a paperclip to press and hold the button for about 10-15 seconds until the indicator light changes, then release. The camera will then restart.

Patricia Q.

How to clean the CTD sensor?

To clean the Color Toner Density (CTD) sensor:

Open the toner access cover on the printer.
Locate the CTD sensor inside the printer.
Gently clean the CTD sensor with a soft, dry cloth. Be careful not to damage the sensor.
Close the toner access cover.

Mary N.

How to install the camera?

To install the camera, first ensure your Wi-Fi network is stable. Then, download the companion app from your app store, create an account, and follow the on-screen instructions to pair the camera. Mount the camera in your desired location using the provided mounting kit.

Mary N.

What is the purpose of the motion detection feature?

The motion detection feature allows the camera to automatically detect movement within its field of view and send instant alerts to your smartphone. Sensitivity settings and detection zones can be customized within the app.