Configuring Printer and Installing Software on Mac OS X. Fuji Xerox DocuPrint CP225 w

Below you will find brief information for Printer CP225 w. This guide provides operating information for the printer's print function. Explore features like easy wireless setup, manual duplex printing, and multiple up printing to conserve paper. Secure Print lets you temporarily store print data for later, and the wireless LAN feature lets you print without a wired connection. Understand the printer's components and menus to maximize use.

PDF

Document

Configuring Printer and Installing Software on Mac OS X



Installing the Print Driver

For information on how to install the print driver, refer to the PostScript 3 Compatible User Guide.



Installing Software

Run the

Software Pack CD-ROM

on the Mac OS X.

Double-click the CD-ROM icon displayed on the desktop.

Double-click the installer icon.

Click

Continue

on the

Introduction

screen.

Select a language for the

Software License Agreement

After reading the

Software License Agreement

, click

Continue

If you agree to the terms of the

Software License Agreement

, click

Agree

to continue the installation process.

NOTE:

• When the screen to select the installation destination appears, select an installation location and click

Continue

Click

Install

to perform the standard installation.

For Mac OS X 10.5 and Mac OS X 10.6, enter the administrator's name and password, and then click

For Mac OS X 10.7, OS X 10.8, and OS X 10.9, enter the administrator's name and password, and then click

Install Software

Click

Continue Installation

Click

Restart

to complete the installation.



Adding a Printer

Adding a Printer on OS X 10.9

• When Using a USB connection

Turn on the printer.

Connect the printer and your computer with the USB cable.

Display

System Preferences

, and then click

Printers & Scanners

Confirm your printer is added to

Printers & Scanners

If your printer is not displayed, execute the following procedures.

Click the plus (

) sign, and then click

Default

If there are printers in

Nearby Printers

, select

Add Printer or Scanner

, and then click

Default

Proceed to step

Select the printer connected via USB from the

Name

list.

Name

Location

, and

Use

are automatically entered.

Click

Add

Printer Connection and Software Installation

• When Using Bonjour

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Printers & Scanners

Click the plus (

) sign, and select the printer from

Nearby Printers

The printer will be added to

Printers & Scanners

If there are no printers in

Nearby Printers

, select

Add Printer or Scanner

, and then click

Default

Proceed to step

Select the printer connected via Bonjour from the

Name

list.

Name

and

Use

are automatically entered.

NOTE:

• If

AirPrint

is automatically selected for

Use

, select the model of your printer for

Use

manually.

Click

Add

• When Using IP Printing

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Printers & Scanners

Click the plus (

) sign, and then click

If there are printers in

Nearby Printers

, select

Add Printer or Scanner

, and then click

Proceed to step

Select

Line Printer Daemon - LPD

for

Protocol

Enter the IP address of the printer in the

Address

area.

Select the model of your printer for

Use

NOTE:

• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.

Click

Add

Printer Connection and Software Installation

Adding a Printer on Mac OS X 10.7 and OS X 10.8

• When Using a USB connection

Turn on the printer.

Connect the printer and your computer with the USB cable.

Display

System Preferences

, and then click

Print & Scan

Confirm your printer is added to

Print & Scan

If your printer is not displayed, execute the following procedures.

Click the plus (

) sign, and then click

Default

If there are printers in

Nearby Printers

, select

Add Other Printer or Scanner

(

Add Printer or Scanner

for

OS X 10.8), and then click

Default

Proceed to step

Select the printer connected via USB from the

Printer Name

(

Name

for OS X 10.8) list.

Name

Location

, and

Print Using

(

Use

for OS X 10.8) are automatically entered.

Click

Add

• When Using Bonjour

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Print & Scan

Click the plus (

) sign, and select the printer from

Nearby Printers

The printer will be added to

Print & Scan

If there are no printers in

Nearby Printers

, select

Add Other Printer or Scanner

(

Add Printer or Scanner

for

OS X 10.8), and then click

Default

Proceed to step

Select the printer connected via Bonjour from the

Printer Name

(

Name

for OS X 10.8) list.

Name

and

Print Using

(

Use

for OS X 10.8) are automatically entered.

NOTE:

• If

AirPrint Printer

(

AirPrint

for OS X 10.8) is automatically selected for

Print Using

(

Use

for OS X 10.8), select the model of your printer for

Use

manually.

Click

Add

Printer Connection and Software Installation

• When Using IP Printing

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Print & Scan

Click the plus (

) sign, and then click

If there are printers in

Nearby Printers

, select

Add Other Printer or Scanner

(

Add Printer or Scanner

for

OS X 10.8), and then click

Proceed to step

Select

Line Printer Daemon - LPD

for

Protocol

Enter the IP address of the printer in the

Address

area.

Select the model of your printer for

Print Using

(

Use

for OS X 10.8).

NOTE:

• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.

Click

Add

Adding a Printer on Mac OS X 10.5.8 and Mac OS X 10.6

• When Using a USB connection

Turn on the printer.

Connect the printer and your computer with the USB cable.

Display

System Preferences

, and then click

Print & Fax

Confirm your printer is added to

Print & Fax

System Preferences

If your printer is not displayed, execute the following procedures.

Click the plus (

) sign, and then click

Default

Select the printer connected via USB from the

Printer Name

list.

Name

Location

, and

Print Using

are automatically entered.

Click

Add

Printer Connection and Software Installation

• When Using Bonjour

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Print & Fax

Click the plus (

) sign, and then click

Default

Select the printer connected via Bonjour from the

Printer Name

list.

Name

and

Print Using

are automatically entered.

Click

Add

• When Using IP Printing

Turn on the printer.

Make sure that your computer is connected to the network.

If you use wired connection, make sure that the Ethernet cable is connected between the printer and the network.

If you use wireless connection, make sure that wireless connection is configured properly on your computer and printer.

Display

System Preferences

, and then click

Print & Fax

Click the plus (

) sign, and then click

Select

Line Printer Daemon - LPD

for

Protocol

Enter the IP address of the printer in the

Address

area.

Select the model of your printer for

Print Using

NOTE:

• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.

Click

Add

Printer Connection and Software Installation

Key features

Easy Wireless Connection Setup
Manual Duplex Print
Multiple Up Print
Secure Print
Wireless Print

Frequently asked questions

Connect the power cord to the power connector and the power source, then turn on/off the printer by pressing the power switch.

The printer supports A4, B5, A5, C5, Monarch, Com 10, DL, Letter, Legal, Folio, Executive, and custom sizes.

The document does not describe the process how to manually duplex print.

User questions

Robert C.

How to connect a printer to a wireless network using WPS-PIN?

Access the printer's Admin Menu. 2. Go to Network > WPS Setup > PIN Code. 3. Note the 8-digit PIN. 4. Start Configuration and select your wireless access point. 5. Enter the PIN into your access point within two minutes. A lit Wi-Fi LED confirms connection.

Mary N.

How to reset the camera?

To perform a factory reset, locate the reset button on the device, usually a small pinhole. Use a paperclip to press and hold the button for about 10-15 seconds until the indicator light changes, then release. The camera will then restart.

Patricia Q.

How to clean the CTD sensor?

To clean the Color Toner Density (CTD) sensor:

Open the toner access cover on the printer.
Locate the CTD sensor inside the printer.
Gently clean the CTD sensor with a soft, dry cloth. Be careful not to damage the sensor.
Close the toner access cover.

Mary N.

How to install the camera?

To install the camera, first ensure your Wi-Fi network is stable. Then, download the companion app from your app store, create an account, and follow the on-screen instructions to pair the camera. Mount the camera in your desired location using the provided mounting kit.

Mary N.

What is the purpose of the motion detection feature?

The motion detection feature allows the camera to automatically detect movement within its field of view and send instant alerts to your smartphone. Sensitivity settings and detection zones can be customized within the app.