Cruise Control
PRINCIPLE OF OPERATION
Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed 30 km/h (20 mph).
USING CRUISE CONTROL
WARNING
Do not use cruise control in heavy traffic, on twisty roads or when the road surface is slippery.
Switching cruise control on
Changing the set speed
WARNING
When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes. Change down a gear and press the
RES switch to assist the system in maintaining the set speed.
Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set.
Press the SET+ switch or the SET switch to accelerate or decelerate.
Canceling the set speed
Setting a speed
Press the brake pedal or the CAN switch.
The system will no longer control your speed. The cruise control indicator will go off but the system will retain the speed that you previously set.
Press the SET+ switch or the SET switch to store and maintain your current speed.
The cruise control indicator illuminates.
180
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Resuming the set speed
Cruise Control
Press the RES switch. The cruise control indicator illuminates and the system will attempt to resume the speed that you previously set.
Switching cruise control off
Press the OFF switch. The system will not retain the speed that you previously set.
The cruise control indicator will go off.
181
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
