Audio Troubleshooting
AUDIO TROUBLESHOOTING
Audio unit display
CD ERROR
PLEASE CHECK CD
CDC ERROR
NO CD
NO CDS
NO CD #
HIGH TEMP
CD DRIVE HIGH TEMP
SLOT FULL
CDC FULL
DATA CD
CODE ----
WAIT
TRIES
LOCKED
KEYCODE....
ENTER KEYCODE....
INCORRECT
Rectification
General error message for CD fault conditions, for example cannot read the CD, data-CD inserted. May also indicate a audio unit malfunction. Make sure that the disc is correctly loaded, clean and reload the CD or
replace the CD with a known music CD. See Ejecting compact discs
(page 288). See Loading compact discs (page 286). If error continues. See your dealer.
Message to indicate that the audio unit or CD changer
is empty. Insert a CD. See Loading compact discs
(page 286).
Ambient temperature too hot – unit will not work until it has cooled down.
Message to indicate that the CD slot is already loaded.
Eject the CD from selected slot before attempting load
operation or select another slot location. See Loading compact discs (page 286).
Message to indicate that the audio unit is full. See
Ejecting compact discs (page 288).
An incompatible CD has been inserted, for example not
an audio CD. See Ejecting compact discs (page 288).
Message to prompt you for the keycode. See Entering a security code (page 275).
Message to inform you to wait until the next keycode
entry attempt can be made. See Incorrect security code (page 275).
Message indicates the number of incorrect input
attempts. See Incorrect security code (page 275).
Message to inform you that audio unit security system has locked the unit after repeated incorrect keycode entries. See your dealer.
Message to prompt you for the keycode. See Entering a security code (page 275).
Message to inform you that the entered keycode is
incorrect. See Incorrect security code (page 275).
292
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
