Audio System Security
SECURITY CODE
Each unit incorporates a unique code that must be entered before the unit will operate.
If the battery is disconnected or if the unit has been removed from the vehicle, the code must be re-entered before the unit will operate.
LOST SECURITY CODE
If you lose the unique code, contact your dealer and supply details of your audio unit along with some proof of identity.
ENTERING A SECURITY CODE
If CODE - - - , CODE 0000 or ENTER
KEYCODE appears in the display when you switch on the audio unit, you must enter the unique code using the station preset buttons.
6000CD, Sony and Sony DAB
1.
Using the station preset buttons enter the unique code.
2. If you make a mistake entering the code, re-enter the digits by continuing to select buttons 0-9. The display will advance from digit position 1 to 4 and then back again.
3. Make sure that the complete code is correct before pressing either the * preset button or the button between the navigation buttons to confirm your selection.
INCORRECT SECURITY CODE
Up to a maximum of 10 unique code entry attempts are allowed with various consequences if you get it wrong.
The number of attempts will be shown in the display.
If the display reverts to CODE another entry attempt may be made immediately.
If the display shows WAIT 30 , the unit will be locked for 30 minutes. Wait until the timer counts down to zero. When CODE is shown in the display, enter the correct code.
Note: After 10 incorrect attempts the unit will be permanently inoperative and
LOCKED will be shown in the display. See your dealer.
275
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
