Audio unit menus. Ford S-MAX, Galaxy

PDF

เอกสาร

โฆษณา

Audio unit menus

AUTOMATIC VOLUME

CONTROL

When available, automatic volume control

(AVC) adjusts the volume level to compensate for engine noise and road speed noise.

All except Sony and Sony DAB

Press the MENU button repeatedly until AVC is shown in the display.

2. Use the seek up or seek down button to adjust the AVC setting.

3. Press the MENU button or allow the system to time out to confirm your selection.

Sony and Sony DAB

Press the MENU button briefly.

2. Using the up or down navigation button select AVC.

3. Press the MENU button or allow the system to time out to confirm your selection.

DIGITAL SIGNAL PROCESSING

(DSP)

DSP occupancy

This feature takes into account the differences in distance from the various speakers in the vehicle to each seat. Select the sitting position for which the audio is to be correctly enhanced.

DSP equalizer

Select the music category that most suits your listening preference. The audio output will change to enhance the particular style of music chosen.

Changing the DSP settings

Press the DSP button once for occupancy and twice for equalizer. For

item location: See Audio unit overview (page 272). .

2. Use the up and down navigation buttons to select the required setting.

3. Press the button between the navigation buttons to confirm your selection.

AUDIO DISTORTION

REDUCTION (CLIP)

When available CLIP automatically detects sound distortion and reduces the volume level until the distortion has been eliminated. This means that whilst the display might change numerically when you raise the volume manually with the control, there may be no actual increase in sound.

All except Sony and Sony DAB

Press and hold the MENU button until the display changes.

2. Press the MENU button repeatedly until CLIP is shown in the display.

3. Using the seek up or seek down button turn the function on or off.

4. Press the MENU button or allow the system to time out to confirm your selection.

Sony and Sony DAB

Press the MENU button briefly.

2. Using the up or down navigation button select CLIP.

3. Press the MENU button or allow the system to time out to confirm your selection.

283

Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing

Audio unit menus

ALTERNATIVE FREQUENCIES

Many programs broadcast on the FM waveband have a programme identification (PI) code, which can be recognized by audio units.

If your radio has alternative frequencies

(AF) tuning switched on and you move from one transmission area to another, this function will search for and switch to a stronger station signal, if one can be found.

Under certain conditions, however, AF tuning may temporarily disrupt normal reception.

When selected, the unit continually evaluates signal strength and, if a better signal becomes available, the unit will switch to that alternative. It mutes while it checks a list of alternative frequencies and, if necessary, it will search once across the selected waveband for a genuine alternative frequency.

It will restore radio reception when it finds one or, if one is not found, the unit will return to the original stored frequency. On certain units, NOT FOUND will be shown in the display.

With AF-MAN selected, the unit operates in a similar way to AF-AUTO or AF-ON, but only searches for an alternative frequency when prompted by pressing a preset button.

With AF-OFF selected, the original stored frequency remains selected. In this mode,

AF-OFF will be displayed every time the unit is turned on.

All except Sony and Sony DAB

Press and hold the MENU button until the display changes.

2. Press the MENU button repeatedly until AF is shown in the display.

3. Using the seek up or seek down button select the required setting.

4. Press the MENU button or allow the system to time out to confirm your selection.

Sony and Sony DAB

Press the MENU button briefly.

2. Using the left or right navigation button select the required setting.

3. Press the MENU button to confirm your selection.

REGIONAL MODE (REG)

Regional mode (REG) controls the behavior of AF switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the country. At various times of the day this large network may be broken down into a number of smaller regional networks, typically centered on major towns or cities.

When the network is not split into regional variants, the whole network caries the same programming.

Regional mode ON: This prevents 'random'

AF switches when neighboring regional networks are not carrying the same programming.

Regional mode OFF: This allows a larger coverage area if neighboring regional networks are carrying the same programming, but can cause 'random' AF switches if they are not.

All except Sony and Sony DAB

Press and hold the MENU button until the display changes.

2. Press the MENU button repeatedly until REG is shown in the display.

284

Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing

Audio unit menus

3. Using the seek up or seek down button turn the function on or off.

4. Press the MENU button or allow the system to time out to confirm your selection.

Sony and Sony DAB

Press the MENU button briefly.

2. Using the up or down navigation button select REGIONAL.

3. Press the MENU button or allow the system to time out to confirm your selection.

NEWS BROADCASTS

Some audio units interrupt normal reception to broadcast news bulletins from stations on the FM waveband or radio data system (RDS) and enhanced other network (EON) linked stations, in the same way as traffic information is provided.

During news broadcasts, the display alternates between the station name and

NEWS. News interrupts are broadcast at the same preset volume level as traffic announcements.