Speed Limiter
PRINCIPLE OF OPERATION
WARNING
When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes but a warning will be given.
The system allows you to set a speed, to which the vehicle then becomes limited.
The set speed will become the effective maximum speed of the vehicle, but with the option to temporarily exceed this limit if required.
USING THE SPEED LIMITER
The system is operated by adjustment controls mounted on the steering wheel.
Press button A to switch the system on and off. The information display will prompt for a speed to be set.
Note: The set speed limit can be intentionally exceeded for a short period if required, for example when overtaking.
Press the SET+ switch or the SET switch to select your desired speed limit. The speed is indicated in the information display and stored as the set speed.
Press button B to cancel the limiter and place it in standby mode. The information display will confirm deactivation by showing the set speed crossed out.
Setting the speed limit
Use the cruise control switches to alter the maximum speed setting.
Press the RES button to resume the limiter. The information display will confirm the system is active by showing the set speed again.
Intentionally exceeding the speed limit
Depress the accelerator hard close to the full pedal travel and the limit will temporarily deactivate. The system will reactivate once the vehicle speed drops below the set speed.
188
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Speed Limiter
System warnings
If the set limit is accidentally exceeded the information display will show the set speed flashing together with an audible warning chime.
If the set limit is intentionally exceeded the information display will show the set speed crossed out.
189
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
