3.3 Power Supply Specifications. Mitsubishi Electric GT15
विज्ञापन
विज्ञापन
3.3 Power Supply Specifications
Item
Specifications
GT1585-STBA GT1575-STBA, GT1575-VTBA, GT1565-VTBA
Input power supply voltage
Input frequency
Input max. apparent power
Power consumption
At backlight off
AC100 to 240V(+10% -15%)
50/60Hz ± 5%
90VA (maximum load)
Inrush current
28W or less
45A or less (4ms)
(maximum load)
26W or less
20W or less
40A or less (4ms)
(maximum load)
Permissible instantaneous power failure time
Noise immunity
20ms (100VAC or longer)
By noise simulator of 1,500Vp-p noise voltage, 1
25 to 60Hz noise frequency
µ s noise width and
Dielectric withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque (Terminal block terminal screw)
1500VAC for 1 minute across AC external terminals and earth
10M
Ω
or larger by insulation resistance tester
0.75 to 2 [mm
2
]
Solderless terminal for M3 screw RAV1.25-3, V2-S3.3, V2-N3A,
FV2-N3A
0.5 to 0.8 [N•m]
Remarks
Operation at momentary power failure
• If an instantaneous power failure occurs in the power supply and continues for more than the permissible period, the GOT will be reset.
• Make sure to power on the unit more than 5 seconds after power-off.
13
डाउनलोड
विज्ञापन