6.3.4 Battery Life. Mitsubishi Electric GT15
जाहिरात
जाहिरात
(6) Turn the GOT power supply on.
(7) Check if the battery condition is normal within the utility.
For details, refer to the GT15 User’s Manual.
POINT
1. Precautions after battery replacement
Make sure to turn on the GOT power supply once upon completion of battery replacement.
Failure to do so may decrease the battery life.
2. When the bus connection unit (GT15-75ABUSL/GT15-75ABUS2L) is connected to GT1565
Before installing or replacing the battery, disconnect the bus connection cable.
(When connecting or disconnecting the bus connection cable, be sure to power off the GOT and PLC.)
6.3.4 Battery Life
Life span of the battery set in the GOT is shown below.
GOT model
Operating ambient temperature of 0 to
45°C
Battery life
Operating ambient temperature of 45 to
55°C
Data backup time after detection of battery voltage low
*
GT1585
GT1575
GT1565
5 years 3 years 14 days
*: In the following conditions, the data backup time is 5 minutes after the power supply is turned off.
• The battery connector is disconnected.
• The battery lead is disconnected.
POINT
Battery life and replacement time
1. Battery life reference: Approx.5 years in actual use (Operating ambient temperature of 25°C)
Battery replacement time reference: 4 to 5 years
Calculate the natural discharge amount of the battery, as necessary.
2. Check if the battery condition is normal within the utility.
For details, refer to the GT15 User’s Manual.
31
MEMO
32
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be the cause of
Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by
Mitsubishi; damages to products other than Mitsubishi products; and to other duties.
For safe use
• This product has been manufactured as a general-purpose part for general industries, and has not been designed or manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi.
• This product has been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
Country/Region Sales office/Tel
Brazil
U.K
Italy
Germany
500 Corporate Woods Parkway Vernon
MELCO-TEC Rep. Com.e Assessoria
Rua Correia Dias, 184,
Edificio Paraiso Trade Center-8 andar
Paraiso, Sao Paulo, SP Brazil
Mitsubishi Electric Europe B.V. German
Branch
Gothaer Strasse 8 D-40880 Ratingen,
GERMANY
Mitsubishi Electric Europe B.V. UK
Branch
Travellers Lane, Hatfield, Herts., AL10
8XB,UK
Mitsubishi Electric Europe B.V. Italian
Branch
Centro Dir. Colleoni, Pal. Perseo-Ingr.2
Via Paracelso 12, 20041 Agrate B.,
Country/Region Sales office/Tel
Hong Kong Ryoden Automation Ltd.
10th Floor, Manulife Tower, 169 Electric
Road, North Point, HongKong
China Ryoden Automation Shanghai Ltd.
Instrumentation Plaza 103 Cao Bao Rd.
Shanghai 200233 China
+86-21-6120-0808
Taiwan Setsuyo Enterprise Co., Ltd.
6F., No.105 Wu-Kung 3rd.RD, Wu-Ku
Korea
Singapore
Mitsubishi Building
Thailand
HAN NEUNG TECHNO CO.,LTD.
1F Dong Seo Game Channel Bldg.,
Mitsubishi Electric Asia Pte, Ltd.
307 Alexandra Road #05-01/02,
F. A. Tech Co.,Ltd.
Tower 2,Floor 17-18 Rama 3 Road,
Spain Mitsubishi Electric Europe B.V. Spanish
Branch
Carretera de Rubi 76-80
08190 Sant Cugat del Valles,
France Mitsubishi Electric Europe B.V. French
Branch
25 Boulevard des Bouvets, F-92741
Indonesia
India
P.T. Autoteknindo SUMBER MAKMUR
Jl. Muara Karang Selatan Block a Utara
No.1 Kav. No.11 Kawasan Industri/
Pergudangan Jakarta - Utara 14440
Electronic Sadan NO:111 Unit No15,
South Africa Circuit Breaker Industries LTD.
Tripswitch Drive, Elandsfontein Gauteng,
Australia Mitsubishi Electric Australia Pty. Ltd.
348 Victoria Road, PostalBag, No 2,
HEAD OFFICE : 1-8-12, OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212, JAPAN
NAGOYA WORKS : 1-14, YADA-MINAMI 5-CHOME, HIGASHI-KU, NAGOYA, JAPAN
When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission.
Specifications subject to change without notice.
Printed in Japan on recycled paper.
डाउनलोड
जाहिरात