6.3 Battery Voltage Low Detection and Battery Replacement. Mitsubishi Electric GT15
Iklan
Iklan
6.3 Battery Voltage Low Detection and Battery Replacement
Battery is used to store the current time or maintenance time notification data.
It is recommended to replace battery periodically.
6.3.1 Applicable Battery
The following battery is applicable for GT15 .
Model Description
GT15-BAT Battery for backup of clock data and maintenance time notification data.
6.3.2 Battery Specifications
Item
Type
Initial voltage
Nominal current
Storage life
Total power stoppage time
Application
Specifications
Magnesium manganese dioxide lithium primary battery
3.0V
1800mAh
Approx.5 years (Operating ambient temperature of 25°C)
Refer to Section 6.3.4.
For backup of clock data and maintenance time notification data.
6.3.3 Battery Replacement Procedure
Replace battery periodically by referring to Section 6.3.4 Battery life.
BATTERY
(1) Keep the GOT power supply on for 10 minutes or more, and turn it off.
(Executes step 2 to 6 within 5 minutes of powering the GOT power supply off.)
(2) Remove the battery folder form the GOT backside.
Battery holder
(GOT backside)
(3) Remove the old battery from the folder and disconnect the connector.
(4) Connect the new battery to the connector.
(5) Insert the battery into the folder and set it into the GOT backside.
30
Unduh
Iklan