advertisement
7.20 UPPER CROSS AUGER
SECTION 7. OPERATION
a. Lower header to ground, stop engine, and remove key.
WARNING
Stop engine, and remove key before removing plugged material from header. A child or even a pet could engage the drive.
C
A
The cross auger helps deliver very bulky crops across the header onto the windrow.
Removable beater bars assist in delivering material through the header opening.
If wrapping occurs, the beater bars can be removed as shown in the next column.
B
DOUBLE REEL HEADERS
C
B
A
SINGLE REEL HEADERS b. Remove bolts (A) securing bars (B) and clamps
(C) to auger tubes, and remove bars and clamps.
To re-install the beater bars:
a. Locate one beater bar (B) with one clamp set (C) on auger tube, and loosely secure with carriage bolt (A) and nut. Bolt head must face direction of auger rotation. b. Locate remaining clamp sets on tube, and loosely attach to beater bar with carriage bolts and nuts.
Bolt heads must face direction of auger rotation. c. Position second beater bar in clamps, and secure with carriage bolts and nuts.
Form 169441
62
Revision B
advertisement
Key Features
- Cuts and lays crop into uniform fluffy windrows
- Allows starting the harvest earlier
- Protects the crop from wind damage
- Gives you more flexibility in scheduling combine time
- Designed for self-propelled windrowers
- Optional hay conditioner available