advertisement
SECTION 8. MAINTENANCE AND SERVICING
8.11.2 INTERVAL MAINTENANCE
INTERVAL SERVICE
FIRST USE
Refer To Section 8.11.1 BREAK-IN INSPECTIONS (previous page).
100 HOURS OR
ANNUALLY *
1. Check Wobble Box Mounting Bolts.
2. Check Wobble Box Lubricant Level.
3. Check Sickle Drive Belt Tension.
4. Check Transport Wheel Bolt Torque
(Option).
5. Check Reel Tine To Cutterbar
Clearance.
END OF
SEASON
6. Check Reel Drive Chain Tension.
7. Grease Reel Drive Chain.
8. Grease Upper Cross Auger RH
Support (Option).
Refer To Section 7.22 STORAGE.
10 HOURS OR
DAILY
1. Check Hydraulic Hoses And Lines For Leaks.
2. Check Stabilizer/Transport Wheels Tire Pressure.
3. Check Sickle Sections, Guards, And Hold-Downs.
4. Oil Sickle (Except In Sandy Conditions).
25 HOURS
1. Grease Sickle Head.
50 HOURS
1. Grease Sickle Drive Shaft Bearings (Double Knife).
2. Grease Draper Roller Bearings.
250 HOURS OR
ANNUALLY *
1. Grease Transport Axle Pivot Bushings (Option).
2. Grease Split Reel U-Joint.
3. Grease Upper Cross Auger Center Support (30 FT. and Up - Option).
500 HOURS OR
ANNUALLY*
1. Grease Transport/Stabilizer Wheel Hub Bearings.
2. Grease Reel Shaft Bearings.
1000 HOURS OR
3 YEARS
1. Change Wobble Box Lubricant.
* IT IS RECOMMENDED THAT ANNUAL MAINTENANCE BE DONE PRIOR TO START OF OPERATING
SEASON.
Form 169441
140
Revision B
advertisement
Key Features
- Cuts and lays crop into uniform fluffy windrows
- Allows starting the harvest earlier
- Protects the crop from wind damage
- Gives you more flexibility in scheduling combine time
- Designed for self-propelled windrowers
- Optional hay conditioner available