MAINTENANCE SCHEDULE. MacDon D50 & D60

SECTION 8. MAINTENANCE AND SERVICING

8.11 MAINTENANCE SCHEDULE

The following maintenance schedule is a listing of periodic maintenance procedures, organized by service intervals. Regular maintenance is the best insurance against early wear and untimely breakdowns. Following this schedule will increase machine life.

For detailed instructions, refer to the specific headings in Section 8 MAINTENANCE AND

SERVICING. Use the fluids and lubricants specified in Section 8.3.4 Recommended Fluids and Lubricants.

Service Intervals: The recommended service intervals are in hours of operation. Where a service interval is given in more than one time frame, e.g. "100 hours or Annually", service the machine at whichever interval is reached first.

IMPORTANT

Recommended intervals are for average conditions. Service the machine more often if operated under adverse conditions (severe dust, extra heavy loads, etc.).

CAUTION

Carefully follow safety messages given under

Section 8.1 PREPARATION FOR SERVICING, and Section 8.2 RECOMMENDED SAFETY

PROCEDURES.

Hardware

BREAK-IN INSPECTIONS

HOURS ITEM CHECK

Torque. Refer to Section 8.3.1 Recommended Torques.

5

Sickle Drive Belts.

Tension. Refer to Section Refer to Section 8.7.8 Sickle Drive

Belts - Non-Timed Drive and 8.7.9 Sickle Drive Belts - Timed

Drive.

Periodically check for first 50 hours.

10

50

Wobble Box Mounting Bolts

Wobble Box Lubricant.

Torque. Refer to Section 8.7.10.1 Mounting Bolts.

Change. Refer to 8.7.10.6 Changing Oil.

Form 169441

139

Revision B