LED Displays

C

LED Status

Table C–1 indicates LED status on the MLX-20L console. LED status is indicated

on the LEDs next to the 20 buttons below the display area on the system programming console. LED status is simulated on the computer screen when you use SPM.

Table C–2 indicates LED status on the DSS console. LED status is indicated on

the red LED next to the 50 extension buttons.

System Programming C–1

LED Displays

Table C–0. Line or Trunk Feature Status

*

System

Programming

Menu

Option

Lines Trunks

Option

Tie Lines

Inmode

ON

Green LED

OFF

Outmode

Incoming tie line is touchtone

Outgoing tie line is touchtone

Remote dial tone†

Incoming tie line is rotary dial†

Outgoing tie line is rotary dial†

Local dial tone

Lines Trunks

Dialtone

TT/LS Disc

Outmode Line/Trunk is touch-tone†

Line/trunk is rotary dial

Lines Trunks

Lines Trunks

Pools

Toll Type

Lines Trunks

Lines Trunks

Extensions

Hold

Disconct

LS-ID Delay

Lines Trunks

Must dial 1 + area code†

Long-450 ms†

LS-ID Delay is on

Line/trunk or pool is assigned to button

1 + dialing is not needed

Short- 50 ms

LS-ID Delay is off†

Line/trunk or pool is not assigned to button

†

LED Status*

FLASHING ON

Trunk is in pool

Trunk is assigned to a pool

Red LED

OFF

Trunk is not in pool

FLASHING

LED Status is indicated on LEDs next to the 20 buttons below the display area of the system programming console or simulated on the computer screen when using SPM.

This is the factory setting.

C–2 System Programming

LED Displays

Table C–2. Telephone Feature Status for DSS Console Only

System

Programming

Menu

Option

Extensions

Extensions

Extensions

Option

Account

(FACE)

BIS/HFAI

Call Pickup

Red LED Status

ON

Forced Account

Code Entry assigned

Telephone has

BIS/HFAI capability

(factory setting for analog multiline telephones)

Telephone is assigned to Call

Pickup Group

OFF

Forced Account

Code Entry not assigned†

Other

Telephone is not assigned to Call

Pickup Group†

FLASHING

Extensions VoiceSignl Voice Announce to Busy assigned

Voice Announce to Busy not assigned†

Extensions

Extensions

Extensions

Extensions

Extensions

Extensions

Ext Status

Group Page

Extension Status assigned

Telephone is in group

Group Cover Telephone is in coverage group

Group Calling

Members

Mic Disable

Telephone is assigned to group

Telephone microphone is disabled

Remote Frwd Telephone can transfer calls to a remote telephone number

Extension Status not assigned

Telephone is not in group†

Telephone is not in coverage group†

Telephone is not assigned to group†

Telephone microphone is enabled

Telephone cannot transfer calls to a remote telephone number†

Extension Status can be assigned

† This is the factory setting.

Continued on next page

System Programming C–3

LED Displays

Table C–2, Continued

†

System

Programming

Menu

Option Option ON

Night Service Group Assign Telephone is in group

Night Service Exclude List Telephone is excluded

Aux Equip Msg Waiting Station is a fax message-waiting station

Aux Equip

Tables

Tables

Data

Operator

Red LED Status

OFF

Telephone is not in group†

Telephone is not excluded†

Station is not a fax messagewaiting station

Fax Extension Extension is a fax machine

AllowTo Allowed List assigned to telephone

DisallowTo

Voice/Data

Direct Trunk

Queued Call

Extension is not a fax machine

Allowed List is not assigned to telephone†

Disallowed list assigned to telephone

Voice/Data pair

Disallowed list is not assigned to telephone†

Not Voice/Data pair†

Operator position Other

Operator

Operator

Operator

Queued Call

Message

Center

Message Center position

In Queue Alert Position receives

In-Queue Alert

Call Types-

Dial 0, LDN

Unassigned

DID, Grp

Coverage

Position receives call type

Other

Other

Other

FLASHING

Can be assigned as operator position

Can be assigned as Message

Center

Position can receive In-Queue

Alert

Position can receive call type

This is the factory setting.

C–4 System Programming