Machine Components. Canon Color imageCLASS MF9280Cdn, Color imageCLASS MF9220Cdn

1-2

Machine Components

Machine Components

This section describes the names and functions of all the parts on the outside and inside of the machine.

External View (Front)

①Feeder

Originals placed in the Feeder are automatically fed sheet by sheet to the scanning area. The feeder also automatically turns over two-sided originals to make one- or two-sided copies.

②Slide Guides

Adjust the slide guides to match the width of the originals.

③Original Supply Tray

Originals placed here are automatically fed sheet by sheet to the scanning area of the platen glass.

Place originals into this tray with the surface that you want to scan face up.

④Original Output Tray

Originals that have been scanned from the original supply tray are output to the original output tray in the order that they are fed into the feeder.

⑤Original Stopper

Prevents the originals from falling off the paper delivery tray.

Open the stopper from its original position for

LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper.

⑥Control Panel

Machine controls.

⑦Stack Bypass Tray

Feeds non-standard size or thick/thin type paper stacks.

⑧Stack Bypass Tray Extension

Pull out to load paper stack.

⑨Slide Guides for Stack Bypass Tray

Adjusts to the width of the paper.

Machine Components

⑩Paper Stopper

Prevents the paper from falling off the paper delivery tray.

Open the stopper from its original position for

LTR/A4 size paper. For LGL size paper, pull out the extension first, and then open the stopper.

⑪Paper Delivery Tray

Copies, prints and faxes are output to the paper delivery tray.

⑫Main Power Switch

Press to the “I” side to turn the power ON.

⑬USB Port

Connect the USB (Universal Serial Bus) cable.

⑭Ethernet Port

Connect the network cable.

⑮External Device Jack

Connect an external device.

⑯Telephone Line Jack

Connect the external telephone cable.

⑰Paper Drawer

Holds up to 250 sheets of paper (20 lb (75 g/m 2 )).

⑱Optional Cassette Feeding Unit-AC1

Holds the additional paper supply. Up to 500 sheets of paper (20 lb (75 g/m 2 )) can be held.

1-3

1-4

Machine Components

External View (Back)

⑲Back Cover

Open this cover to clear paper jams.

⑳Power Socket

Connect the power cord.

Internal View

Machine Components

㉑Scanning Area

Originals placed in the feeder are scanned here.

㉒Platen Glass

Place originals here when scanning books, thick originals, thin originals, transparencies, etc.

㉓Toner Cartridges

When toner runs out, pull out the empty toner cartridges, and replace them with new ones.

㉔Delivery Feeder Unit (Electrostatic Transfer Belt)

Transfers toner to paper. Do not place any objects on or touch the transfer belt. Doing so deteriorates print quality.

㉕Front Cover

Open this cover to replace the toner cartridges or to clear paper jams.

㉖Duplex Unit

The duplex unit enables you to use the 2-Sided mode for copying or printing.

㉗Fixing Unit

The fixing unit fixes the toner to the paper. The parts inside the fixing unit are subject to high temperatures. When removing jammed paper, take care not to touch anything in this area.

1-5